Added support for --log-healthy (HP-UX)

Other fixes

configs/etc/check_hpux_drd_status.conf.dist

@@ -6,6 +6,11 @@
 # [default: indicates hardcoded script values if no value is defined here]
 #******************************************************************************
 
+# specify whether to also log passed health checks
+# (warning: this may rapidly grow the HC log)
+# [default: no]
+log_healthy="no"
+
 # check clone age? (yes|no)
 # [default: yes]
 check_clone="yes"

configs/etc/check_hpux_file_age.conf.dist

@@ -6,8 +6,18 @@
 # [default: indicates hardcoded script values if no value is defined here]
 #******************************************************************************
 
-# file (full path); maximum age in minutes since last change
+# specify whether to also log passed health checks
-/var/adm/syslog/syslog.log;60
+# (warning: this may rapidly grow the HC log)
+# [default: no]
+log_healthy="no"
+
+# specify file details
+# Format:
+#   file:<file_path>:<max_age_minutes_since_last_change>
+# Examples:
+#file:/var/log/messages:60
+#file:/var/log/ntp.log:30
+
 
 #******************************************************************************
 # End of FILE

configs/etc/check_hpux_file_change.conf.dist

@@ -6,6 +6,11 @@
 # [default: indicates hardcoded script values if no value is defined here]
 #******************************************************************************
 
+# specify whether to also log passed health checks
+# (warning: this may rapidly grow the HC log)
+# [default: no]
+log_healthy="no"
+
 # name of the state file to use (will be relative to /var/opt/hc/state/persistent
 # [default: discovered.file_change]
 state_file=discovered.file_change

configs/etc/check_hpux_fs_mounts_options.conf.dist

@@ -6,6 +6,11 @@
 # [default: indicates hardcoded script values if no value is defined here]
 #******************************************************************************
 
+# specify whether to also log passed health checks
+# (warning: this may rapidly grow the HC log)
+# [default: no]
+log_healthy="no"
+
 # specify whether non-mounted FS should be alerted on (yes|no)
 # [default: yes]
 ignore_missing_fs="yes"

configs/etc/check_hpux_hpvm_vpar_status.conf.dist

@@ -6,12 +6,18 @@
 # [default: indicates hardcoded script values if no value is defined here]
 #******************************************************************************
 
+# specify whether to also log passed health checks
+# (warning: this may rapidly grow the HC log)
+# [default: no]
+log_healthy="no"
+
 # specify properties as displayed by the 'vzlist -a -H -o ctid,status,onboot' command
-# [parid;runtime_status;boot_status]
+# Format:
+#  [vpar:<parid>:<runtime_status>:<boot_status>]
 # runtime_status should be 'on' or 'off'
 # boot_status should be 'auto' or 'manual'
 # Examples:
-#1;on;auto
+#vpar:1:on:auto
 
 
 #******************************************************************************

configs/etc/check_hpux_ioscan.conf.dist

@@ -6,6 +6,11 @@
 # [default: indicates hardcoded script values if no value is defined here]
 #******************************************************************************
 
+# specify whether to also log passed health checks
+# (warning: this may rapidly grow the HC log)
+# [default: no]
+log_healthy="no"
+
 # comma-separated list of HW device classes that should be checked
 # [default: ctl,diag,disk,ext_bus,fc,fcp,i2o,ipmi,lan,lvm,olar,vxvm]
 ioscan_classes="ctl,diag,disk,ext_bus,fc,fcp,i2o,ipmi,lan,lvm,olar,vxvm"

configs/etc/check_hpux_kernel_params.conf.dist

@@ -6,7 +6,13 @@
 # [default: indicates hardcoded script values if no value is defined here]
 #******************************************************************************
 
+# specify whether to also log passed health checks
+# (warning: this may rapidly grow the HC log)
+# [default: no]
+log_healthy="no"
+
 # specify kernel parameters and their values or expression (as reported by kctune)
+# Format:
 #   [param:<param_name>:<param_value>]
 # Examples:
 #param:nproc:5000

configs/etc/check_hpux_kernel_usage.conf.dist

@@ -6,12 +6,18 @@
 # [default: indicates hardcoded script values if no value is defined here]
 #******************************************************************************
 
+# specify whether to also log passed health checks
+# (warning: this may rapidly grow the HC log)
+# [default: no]
+log_healthy="no"
+
 # specify a general maximum usage threshold (percentage)
 # [ default: 90% ]
 max_kcusage=90
 
 # specify individual kernel parameters and their maximum usage threshold (percentage)
 # definitions here will overrides max_kcusage for these parameters
+# Format:
 #   [param:<param_name>:<param_threshold>]
 # Examples:
 #param:nproc:70

configs/etc/check_hpux_ovpa_status.conf.dist

@@ -15,6 +15,7 @@ log_healthy="yes"
 # [default: oacore,midaemon,perfalarm,ttd,ovcd,ovbbccb,perfd (v12)]
 ovpa_daemons=""
 
+
 #******************************************************************************
 # End of FILE
 #******************************************************************************

configs/etc/check_hpux_root_crontab.conf.dist

@@ -6,8 +6,17 @@
 # [default: indicates hardcoded script values if no value is defined here]
 #******************************************************************************
 
+# specify whether to also log passed health checks
+# (warning: this may rapidly grow the HC log)
+# [default: no]
+log_healthy="no"
+
 # list of commands (or strings) that should appear in active cron entries
-/opt/cfg2html/cfg2html_hpux.sh
+# Format:
+#  cron:<cron_entry>
+# Examples:
+#cron:/opt/cfg2html/cfg2html_hpux.sh
+
 
 #******************************************************************************
 # End of FILE

configs/etc/check_hpux_sg_cluster_status.conf.dist

@@ -6,9 +6,16 @@
 # [default: indicates hardcoded script values if no value is defined here]
 #******************************************************************************
 
-# list of required cluster statuses (format : "parameter=value")
+# specify whether to also log passed health checks
+# (warning: this may rapidly grow the HC log)
+# [default: no]
+log_healthy="no"
+
+# list of required cluster statuses
+# Format:
+#  sg:<parameter>=<value>
 # Examples:
-#status=up
+#sg:status=up
 
 
 #******************************************************************************

configs/etc/check_hpux_sg_package_status.conf.dist

@@ -6,9 +6,16 @@
 # [default: indicates hardcoded script values if no value is defined here]
 #******************************************************************************
 
-# list of required package statuses (format : "package_name:parameter=value")
+# specify whether to also log passed health checks
+# (warning: this may rapidly grow the HC log)
+# [default: no]
+log_healthy="no"
+
+# list of required package statuses
+# Format:
+#  sg:<package_name>:<parameter>=<value>
 # Examples:
-#my_package|status=up
+#sg:my_package:status=up
 
 
 #******************************************************************************

configs/etc/check_hpux_syslog.conf.dist

@@ -6,6 +6,11 @@
 # [default: indicates hardcoded script values if no value is defined here]
 #******************************************************************************
 
+# specify whether to also log passed health checks
+# (warning: this may rapidly grow the HC log)
+# [default: no]
+log_healthy="no"
+
 # path to the SYSLOG file
 # [default: /var/adm/syslog/syslog.log]
 syslog_file="/var/adm/syslog/syslog.log"

sources/lib/platform/hp-ux/check_hpux_autopath.sh

@@ -19,12 +19,13 @@
 # @(#) MAIN: check_hpux_autopath
 # DOES: see _show_usage().
 # EXPECTS: n/a
-# REQUIRES: data_comma2space(), init_hc(), log_hc()
+# REQUIRES: data_comma2space(), init_hc(), log_hc(), warn()
 #
 # @(#) HISTORY:
 # @(#) 2013-08-29: initial version [Patrick Van der Veken]
 # @(#) 2018-05-20: added dump_logs() [Patrick Van der Veken]
 # @(#) 2019-01-24: arguments fix [Patrick Van der Veken]
+# @(#) 2019-03-09: added support for --log-healthy [Patrick Van der Veken]
 # -----------------------------------------------------------------------------
 # DO NOT CHANGE THIS FILE UNLESS YOU KNOW WHAT YOU ARE DOING!
 #******************************************************************************
@@ -35,7 +36,7 @@ function check_hpux_autopath
 # ------------------------- CONFIGURATION starts here -------------------------
 typeset _AUTOPATH_BIN="/sbin/autopath"
 typeset _AUTOPATH_NEEDLE="Failed"
-typeset _VERSION="2019-01-24"                           # YYYY-MM-DD
+typeset _VERSION="2019-03-09"                           # YYYY-MM-DD
 typeset _SUPPORTED_PLATFORMS="HP-UX"                    # uname -s match
 # ------------------------- CONFIGURATION ends here ---------------------------
 
@@ -47,6 +48,7 @@ typeset _ARG=""
 typeset _MSG=""
 typeset _STC=0
 typeset _STC_COUNT=0
+typeset _LOG_HEALTHY=0
 typeset _AUTOPATH_LINE=""
 typeset _DEVICE=""
 
@@ -60,6 +62,20 @@ do
     esac
 done
 
+# log_healthy
+(( ARG_LOG_HEALTHY > 0 )) && _LOG_HEALTHY=1
+if (( _LOG_HEALTHY > 0 ))
+then
+    if (( ARG_LOG > 0 ))
+    then
+        log "logging/showing passed health checks"
+    else
+        log "showing passed health checks (but not logging)"
+    fi
+else
+    log "not logging/showing passed health checks"
+fi
+
 # check autopath presence
 if [[ ! -x ${_AUTOPATH_BIN} ]]
 then
@@ -87,13 +103,16 @@ do
     _STC=1
     _STC_COUNT=$(( _STC_COUNT + 1 ))
 
-    # handle unit result
+    # report result
+    if (( _LOG_HEALTHY > 0 || _STC > 0 ))
+    then
         log_hc "$0" ${_STC} "${_MSG}"
+    fi
     _STC=0
 done
 
 # report OK situation
-if (( _STC_COUNT == 0 ))
+if (( _LOG_HEALTHY > 0 && _STC_COUNT == 0 ))
 then
     _MSG="no failed paths detected by {${_AUTOPATH_BIN}}"
     log_hc "$0" 0 "${_MSG}"
@@ -108,9 +127,9 @@ function _show_usage
 cat <<- EOT
 NAME        : $1
 VERSION     : $2
-CONFIG  : $3
 PURPOSE     : Checks whether failed paths exist for StorageWorks disk arrays
               using the 'autopath' utility.
+LOG HEALTHY : Supported
 
 EOT
 

sources/lib/platform/hp-ux/check_hpux_drd_status.sh

@@ -30,6 +30,7 @@
 # @(#) 2018-10-28: fixed (linter) errors [Patrick Van der Veken]
 # @(#) 2018-10-31: better result check for DRD output [Patrick Van der Veken]
 # @(#) 2019-02-08: fix for mirrored boot disks [Patrick Van der Veken]
+# @(#) 2019-03-09: added support for --log-healthy [Patrick Van der Veken]
 # -----------------------------------------------------------------------------
 # DO NOT CHANGE THIS FILE UNLESS YOU KNOW WHAT YOU ARE DOING!
 #******************************************************************************
@@ -40,7 +41,7 @@ function check_hpux_drd_status
 # ------------------------- CONFIGURATION starts here -------------------------
 typeset _CONFIG_FILE="${CONFIG_DIR}/$0.conf"
 typeset _DRD_BIN="/opt/drd/bin/drd"
-typeset _VERSION="2019-02-08"                           # YYYY-MM-DD
+typeset _VERSION="2019-03-09"                           # YYYY-MM-DD
 typeset _SUPPORTED_PLATFORMS="HP-UX"                    # uname -s match
 # ------------------------- CONFIGURATION ends here ---------------------------
 
@@ -50,6 +51,8 @@ init_hc "$0" "${_SUPPORTED_PLATFORMS}" "${_VERSION}"
 typeset _ARGS=$(data_comma2space "$*")
 typeset _ARG=""
 typeset _MSG=""
+typeset _CFG_HEALTHY=""
+typeset _LOG_HEALTHY=0
 typeset _RC=0
 typeset _CHECK_CLONE=""
 typeset _CHECK_SYNC=""
@@ -111,6 +114,30 @@ then
     _CHECK_SYNC="yes"
 fi
 _SYNC_MAX_AGE=$(_CONFIG_FILE="${_CONFIG_FILE}" data_get_lvalue_from_config 'sync_age')
+_CFG_HEALTHY=$(_CONFIG_FILE="${_CONFIG_FILE}" data_get_lvalue_from_config 'log_healthy')
+case "${_CFG_HEALTHY}" in
+    yes|YES|Yes)
+        _LOG_HEALTHY=1
+        ;;
+    *)
+        # do not override hc_arg
+        (( _LOG_HEALTHY > 0 )) || _LOG_HEALTHY=0
+        ;;
+esac
+
+# log_healthy
+(( ARG_LOG_HEALTHY > 0 )) && _LOG_HEALTHY=1
+if (( _LOG_HEALTHY > 0 ))
+then
+    if (( ARG_LOG > 0 ))
+    then
+        log "logging/showing passed health checks"
+    else
+        log "showing passed health checks (but not logging)"
+    fi
+else
+    log "not logging/showing passed health checks"
+fi
 
 # get drd status
 if [[ ! -x ${_DRD_BIN} ]]
@@ -145,18 +172,27 @@ then
         [[ "${_BOOTED_DISK}"  = "${_ACTIVE_DISK}" ]]
     then
         _MSG="host was booted from original disk (${_ACTIVE_DISK})"
+        if (( _LOG_HEALTHY > 0 ))
+        then
             log_hc "$0" 0 "${_MSG}"
+        fi
     else
         _MSG="host was booted from clone disk (${_ACTIVE_DISK})"
+        if (( _LOG_HEALTHY > 0 ))
+        then
             log_hc "$0" 0 "${_MSG}"
         fi
+    fi
 
     # check EFI status
     _EFI_CLONE=$(data_strip_outer_space "$(grep 'Clone EFI Partition:' ${HC_STDOUT_LOG} 2>/dev/null | cut -f2 -d':')")
     if [[ "${_EFI_CLONE}" = "AUTO file present, Boot loader present" ]]
     then
         _MSG="clone disk ${_CLONE_DISK} has a bootable EFI partition"
+        if (( _LOG_HEALTHY > 0 ))
+        then
             log_hc "$0" 0 "${_MSG}"
+        fi
     else
         _MSG="clone disk ${_CLONE_DISK} does not have a bootable EFI partition"
         log_hc "$0" 1 "${_MSG}"
@@ -165,7 +201,10 @@ then
     if [[ "${_EFI_ORIGINAL}" = "AUTO file present, Boot loader present" ]]
     then
         _MSG="original disk ${_ORIGINAL_DISK} has a bootable EFI partition"
+        if (( _LOG_HEALTHY > 0 ))
+        then
             log_hc "$0" 0 "${_MSG}"
+        fi
     else
         _MSG="original disk ${_ORIGINAL_DISK} does not have a bootable EFI partition"
         log_hc "$0" 1 "${_MSG}"
@@ -195,7 +234,10 @@ then
             if (( _CLONE_EPOCH > (_NOW_EPOCH - (_CLONE_MAX_AGE * 24 * 60 * 60)) ))
             then
                 _MSG="clone age is younger than ${_CLONE_MAX_AGE} days [${_CLONE_DATE}]"
+                if (( _LOG_HEALTHY > 0 ))
+                then
                     log_hc "$0" 0 "${_MSG}"
+                fi
             else
                 _MSG="clone age is older than ${_CLONE_MAX_AGE} days [${_CLONE_DATE}]"
                 log_hc "$0" 1 "${_MSG}"
@@ -232,7 +274,10 @@ then
             if (( _SYNC_EPOCH > (_NOW_EPOCH - (_SYNC_MAX_AGE * 24 * 60 * 60)) ))
             then
                 _MSG="sync age is younger than ${_SYNC_MAX_AGE} days [${_SYNC_DATE}]"
+                if (( _LOG_HEALTHY > 0 ))
+                then
                     log_hc "$0" 0 "${_MSG}"
+                fi
             else
                 _MSG="sync age is older than ${_SYNC_MAX_AGE} days [${_SYNC_DATE}]"
                 log_hc "$0" 1 "${_MSG}"
@@ -261,7 +306,8 @@ function _show_usage
 cat <<- EOT
 NAME        : $1
 VERSION     : $2
-CONFIG  : $3 with:
+CONFIG      : $3 with parameters:
+                log_healthy=<yes|no>
                 check_clone=<yes|no>
                 clone_age=<max_age_of_clone_in_days>
                 check_sync=<yes|no>
@@ -269,6 +315,7 @@ CONFIG  : $3 with:
 PURPOSE     : Checks whether the DRD clone was correctly created
               Checks for correct EFI partitions
               Checks the age of the DRD clone and/or sync
+LOG HEALTHY : Supported
 
 EOT
 

sources/lib/platform/hp-ux/check_hpux_file_age.sh

@@ -19,7 +19,8 @@
 # @(#) MAIN: check_hpux_file_age
 # DOES: see _show_usage()
 # EXPECTS: see _show_usage()
-# REQUIRES: data_comma2space(), init_hc(), log_hc()
+# REQUIRES: Perl, data_comma2space(), data_is_numeric(), init_hc(),
+#           log_hc(), warn()
 #
 # @(#) HISTORY:
 # @(#) 2013-05-27: initial version [Patrick Van der Veken]
@@ -27,6 +28,8 @@
 # @(#) 2018-10-28: fixed (linter) errors [Patrick Van der Veken]
 # @(#) 2018-11-18: do not trap on signal 0 [Patrick Van der Veken]
 # @(#) 2019-01-24: arguments fix [Patrick Van der Veken]
+# @(#) 2019-03-09: added code for data_is_numeric(), changed format of configuration
+# @(#)             file (; -> :) & added support for --log-healthy [Patrick Van der Veken]
 # -----------------------------------------------------------------------------
 # DO NOT CHANGE THIS FILE UNLESS YOU KNOW WHAT YOU ARE DOING!
 #******************************************************************************
@@ -36,7 +39,7 @@ function check_hpux_file_age
 {
 # ------------------------- CONFIGURATION starts here -------------------------
 typeset _CONFIG_FILE="${CONFIG_DIR}/$0.conf"
-typeset _VERSION="2019-01-24"                           # YYYY-MM-DD
+typeset _VERSION="2019-03-09"                           # YYYY-MM-DD
 typeset _SUPPORTED_PLATFORMS="HP-UX"                    # uname -s match
 # ------------------------- CONFIGURATION ends here ---------------------------
 
@@ -47,6 +50,8 @@ typeset _ARGS=$(data_comma2space "$*")
 typeset _ARG=""
 typeset _MSG=""
 typeset _STC=0
+typeset _CFG_HEALTHY=""
+typeset _LOG_HEALTHY=0
 typeset _REF_FILE="${TMP_DIR}/.$0.ref.$$"
 typeset _DO_REF=0
 typeset _ENTRY=""
@@ -54,6 +59,7 @@ typeset _FILE_PATH=""
 typeset _FILE_AGE=""
 typeset _FILE_NAME=""
 typeset _FILE_DIR=""
+typeset _IS_OLD_STYLE=0
 
 # set local trap for cleanup
 # shellcheck disable=SC2064
@@ -76,14 +82,42 @@ then
     warn "unable to read configuration file at ${_CONFIG_FILE}"
     return 1
 fi
+_CFG_HEALTHY=$(_CONFIG_FILE="${_CONFIG_FILE}" data_get_lvalue_from_config 'log_healthy')
+case "${_CFG_HEALTHY}" in
+    yes|YES|Yes)
+        _LOG_HEALTHY=1
+        ;;
+    *)
+        # do not override hc_arg
+        (( _LOG_HEALTHY > 0 )) || _LOG_HEALTHY=0
+        ;;
+esac
+
+# check for old-style configuration file (non-prefixed stanzas)
+_IS_OLD_STYLE=$(grep -c -E -e "^file:" ${_CONFIG_FILE} 2>/dev/null)
+if (( _IS_OLD_STYLE == 0 ))
+then
+    warn "no 'file:' stanza(s) found in ${_CONFIG_FILE}; possibly an old-style configuration?"
+    return 1
+fi
+
+# log_healthy
+(( ARG_LOG_HEALTHY > 0 )) && _LOG_HEALTHY=1
+if (( _LOG_HEALTHY > 0 ))
+then
+    if (( ARG_LOG > 0 ))
+    then
+        log "logging/showing passed health checks"
+    else
+        log "showing passed health checks (but not logging)"
+    fi
+else
+    log "not logging/showing passed health checks"
+fi
 
 # perform check
-cat ${_CONFIG_FILE} | grep -v -E -e '^$' -e '^#' | while read _ENTRY
+grep -E -e "^file:" ${_CONFIG_FILE} 2>/dev/null | while IFS=":" read -r _ _FILE_PATH _FILE_AGE
 do
-    # field split
-    _FILE_PATH=$(print "${_ENTRY%%;*}")
-    _FILE_AGE=$(print "${_ENTRY##*;}")
-
     # split file/dir
     _FILE_NAME=$(print "${_FILE_PATH##*/}")
     _FILE_DIR=$(print "${_FILE_PATH%/*}")
@@ -94,16 +128,12 @@ do
         warn "missing values in configuration file at ${_CONFIG_FILE}"
         return 1
     fi
-    case "${_FILE_AGE}" in
+    data_is_numeric "${_FILE_AGE}"
-        +([0-9])*(.)*([0-9]))
+    if (( $? > 0 ))
-            # numeric, OK
+    then
-            ;;
-        *)
-            # not numeric
         warn "invalid file age value '${_FILE_AGE}' in configuration file at ${_CONFIG_FILE}"
         return 1
-            ;;
+    fi
-    esac
 
     # calculate reference timestamp & set reference file (once only)
     if (( _DO_REF == 0 ))
@@ -145,8 +175,11 @@ sleep 60
         fi
     fi
 
-    # handle unit result
+    # report result
+    if (( _LOG_HEALTHY > 0 || _STC > 0 ))
+    then
         log_hc "$0" ${_STC} "${_MSG}"
+    fi
     _STC=0
 done
 
@@ -162,10 +195,13 @@ function _show_usage
 cat <<- EOT
 NAME        : $1
 VERSION     : $2
-CONFIG  : $3 with:
+CONFIG      : $3 with parameters:
-            <file_name>;<maximum_age_in_minutes>
+                log_healthy=<yes|no>
+              and formatted stanzas:
+                file:<file_path>:<max_age_in_minutes>
 PURPOSE     : Checks whether given files have been changed in the last n minutes
               (requires perl!)
+LOG HEALTHY : Supported
 
 EOT
 

sources/lib/platform/hp-ux/check_hpux_file_change.sh

@@ -27,6 +27,7 @@
 # @(#) 2018-10-28: fixed (linter) errors [Patrick Van der Veken]
 # @(#) 2018-11-18: do not trap on signal 0 [Patrick Van der Veken]
 # @(#) 2019-01-24: arguments fix [Patrick Van der Veken]
+# @(#) 2019-03-09: added support for --log-healthy [Patrick Van der Veken]
 # -----------------------------------------------------------------------------
 # DO NOT CHANGE THIS FILE UNLESS YOU KNOW WHAT YOU ARE DOING!
 #******************************************************************************
@@ -36,7 +37,7 @@ function check_hpux_file_change
 {
 # ------------------------- CONFIGURATION starts here -------------------------
 typeset _CONFIG_FILE="${CONFIG_DIR}/$0.conf"
-typeset _VERSION="2019-01-24"                           # YYYY-MM-DD
+typeset _VERSION="2019-03-09"                           # YYYY-MM-DD
 typeset _SUPPORTED_PLATFORMS="HP-UX"                    # uname -s match
 # ------------------------- CONFIGURATION ends here ---------------------------
 
@@ -47,6 +48,8 @@ typeset _ARGS=$(data_comma2space "$*")
 typeset _ARG=""
 typeset _MSG=""
 typeset _STC=0
+typeset _CFG_HEALTHY=""
+typeset _LOG_HEALTHY=0
 typeset _DO_META_CHECK=0
 typeset _CFG_STATE_FILE=""
 typeset _STATE_FILE=""
@@ -111,6 +114,30 @@ case "${_DO_META_CHECK}" in
         log "check for meta characters is enabled"
         ;;
 esac
+_CFG_HEALTHY=$(_CONFIG_FILE="${_CONFIG_FILE}" data_get_lvalue_from_config 'log_healthy')
+case "${_CFG_HEALTHY}" in
+    yes|YES|Yes)
+        _LOG_HEALTHY=1
+        ;;
+    *)
+        # do not override hc_arg
+        (( _LOG_HEALTHY > 0 )) || _LOG_HEALTHY=0
+        ;;
+esac
+
+# log_healthy
+(( ARG_LOG_HEALTHY > 0 )) && _LOG_HEALTHY=1
+if (( _LOG_HEALTHY > 0 ))
+then
+    if (( ARG_LOG > 0 ))
+    then
+        log "logging/showing passed health checks"
+    else
+        log "showing passed health checks (but not logging)"
+    fi
+else
+    log "not logging/showing passed health checks"
+fi
 
 # check for checksum tools
 _OPENSSL_BIN="$(which openssl 2>>${HC_STDERR_LOG})"
@@ -293,7 +320,7 @@ do
     fi
 
     # bounce failures back and jump to next file
-    if (( _STC > 0 ))
+    if (( _LOG_HEALTHY > 0 || _STC > 0 ))
     then
         log_hc "$0" ${_STC} "${_MSG}"
         continue
@@ -319,7 +346,11 @@ do
     printf "%s|%s|%s\n" "${_FILE_TO_CHECK}" "${_FILE_TYPE}" "${_FILE_CKSUM}" >>${_TMP2_FILE}
 
     # report with curr/exp values
+    if (( _LOG_HEALTHY > 0 ))
+    then
         log_hc "$0" ${_STC} "${_MSG}" "${_FILE_CKSUM}" "${_STATE_FILE_CKSUM}"
+        continue
+    fi
 done <${_TMP1_FILE}
 
 # update state file (also if TMP2_FILE is empty)
@@ -350,7 +381,9 @@ function _show_usage
 cat <<- EOT
 NAME        : $1
 VERSION     : $2
-CONFIG  : $3 with:
+CONFIG      : $3 with parameters:
+                log_healthy=<yes|no>
+              and  formatted stanzas:
                 incl:<full path>
                 excl:<full path>
 PURPOSE     : a KISS file integrity checker (like AIDE). Supports includes and excludes
@@ -365,6 +398,7 @@ PURPOSE : a KISS file integrity checker (like AIDE). Supports includes and exclu
                          Processing a big number of files is likely to take
                          ages and probably will cause the plugin to time out
                          (see HC_TIME_OUT). YMMV.
+LOG HEALTHY : Supported
 
 EOT
 

sources/lib/platform/hp-ux/check_hpux_fs_mounts.sh

@@ -19,13 +19,14 @@
 # @(#) MAIN: check_hpux_fs_mounts
 # DOES: see _show_usage()
 # EXPECTS: n/a
-# REQUIRES: data_comma2space(), init_hc(), log_hc()
+# REQUIRES: data_comma2space(), init_hc(), log_hc(), warn()
 #
 # @(#) HISTORY:
 # @(#) 2013-05-27: initial version [Patrick Van der Veken]
 # @(#) 2016-04-04: exclude dump/swap spaces (...) [Patrick Van der Veken]
 # @(#) 2016-07-04: fix for nfs exclusion [Patrick Van der Veken]
 # @(#) 2019-01-24: arguments fix [Patrick Van der Veken]
+# @(#) 2019-03-09: added support for --log-healthy [Patrick Van der Veken]
 # -----------------------------------------------------------------------------
 # DO NOT CHANGE THIS FILE UNLESS YOU KNOW WHAT YOU ARE DOING!
 #******************************************************************************
@@ -34,7 +35,7 @@
 function check_hpux_fs_mounts
 {
 # ------------------------- CONFIGURATION starts here -------------------------
-typeset _VERSION="2019-01-24"                           # YYYY-MM-DD
+typeset _VERSION="2019-03-09"                           # YYYY-MM-DD
 typeset _SUPPORTED_PLATFORMS="HP-UX"                    # uname -s match
 # ------------------------- CONFIGURATION ends here ---------------------------
 
@@ -45,6 +46,7 @@ typeset _ARGS=$(data_comma2space "$*")
 typeset _ARG=""
 typeset _MSG=""
 typeset _STC=0
+typeset _LOG_HEALTHY=0
 typeset _FS=""
 typeset _FS_COUNT=0
 
@@ -58,6 +60,20 @@ do
     esac
 done
 
+# log_healthy
+(( ARG_LOG_HEALTHY > 0 )) && _LOG_HEALTHY=1
+if (( _LOG_HEALTHY > 0 ))
+then
+    if (( ARG_LOG > 0 ))
+    then
+        log "logging/showing passed health checks"
+    else
+        log "showing passed health checks (but not logging)"
+    fi
+else
+    log "not logging/showing passed health checks"
+fi
+
 # collect data (mount only)
 mount >>${HC_STDOUT_LOG} 2>>${HC_STDERR_LOG}
 if (( $? > 0 ))
@@ -86,8 +102,11 @@ do
             ;;
     esac
 
-    # handle unit result
+    # report result
+    if (( _LOG_HEALTHY > 0 || _STC > 0 ))
+    then
         log_hc "$0" ${_STC} "${_MSG}"
+    fi
     _STC=0
 done
 
@@ -103,8 +122,8 @@ function _show_usage
 cat <<- EOT
 NAME        : $1
 VERSION     : $2
-CONFIG  : $3
 PURPOSE     : Checks whether file systems are mounted or not
+LOG HEALTHY : Supported
 
 EOT
 

sources/lib/platform/hp-ux/check_hpux_fs_mounts_options.sh

@@ -19,7 +19,7 @@
 # @(#) MAIN: check_hpux_fs_mounts_options
 # DOES: see _show_usage()
 # EXPECTS: see _show_usage()
-# REQUIRES: data_comma2space(), init_hc(), log_hc()
+# REQUIRES: data_comma2space(), init_hc(), log_hc(), warn()
 #
 # @(#) HISTORY:
 # @(#) 2016-04-04: original version [Patrick Van der Veken]
@@ -27,6 +27,7 @@
 # @(#) 2017-07-31: added support for current/expected value output [Patrick Van der Veken]
 # @(#) 2018-10-28: fixed (linter) errors [Patrick Van der Veken]
 # @(#) 2019-01-24: arguments fix [Patrick Van der Veken]
+# @(#) 2019-03-09: added support for --log-healthy [Patrick Van der Veken]
 # -----------------------------------------------------------------------------
 # DO NOT CHANGE THIS FILE UNLESS YOU KNOW WHAT YOU ARE DOING!
 #******************************************************************************
@@ -36,7 +37,7 @@ function check_hpux_fs_mounts_options
 {
 # ------------------------- CONFIGURATION starts here -------------------------
 typeset _CONFIG_FILE="${CONFIG_DIR}/$0.conf"
-typeset _VERSION="2019-01-24"                           # YYYY-MM-DD
+typeset _VERSION="2019-03-09"                           # YYYY-MM-DD
 typeset _SUPPORTED_PLATFORMS="HP-UX"                    # uname -s match
 # ------------------------- CONFIGURATION ends here ---------------------------
 
@@ -47,6 +48,8 @@ typeset _ARGS=$(data_comma2space "$*")
 typeset _ARG=""
 typeset _MSG=""
 typeset _STC=0
+typeset _CFG_HEALTHY=""
+typeset _LOG_HEALTHY=0
 typeset _CONFIG_FS=""
 typeset _CONFIG_OPTS=""
 typeset _CURR_OPTS=""
@@ -80,6 +83,30 @@ then
     # default
     _IGNORE_FS="yes"
 fi
+_CFG_HEALTHY=$(_CONFIG_FILE="${_CONFIG_FILE}" data_get_lvalue_from_config 'log_healthy')
+case "${_CFG_HEALTHY}" in
+    yes|YES|Yes)
+        _LOG_HEALTHY=1
+        ;;
+    *)
+        # do not override hc_arg
+        (( _LOG_HEALTHY > 0 )) || _LOG_HEALTHY=0
+        ;;
+esac
+
+# log_healthy
+(( ARG_LOG_HEALTHY > 0 )) && _LOG_HEALTHY=1
+if (( _LOG_HEALTHY > 0 ))
+then
+    if (( ARG_LOG > 0 ))
+    then
+        log "logging/showing passed health checks"
+    else
+        log "showing passed health checks (but not logging)"
+    fi
+else
+    log "not logging/showing passed health checks"
+fi
 
 # collect data (mount only)
 mount >>${HC_STDOUT_LOG} 2>>${HC_STDERR_LOG}
@@ -117,8 +144,11 @@ do
         fi
     fi
 
-    # handle unit result
+    # report result
+    if (( _LOG_HEALTHY > 0 || _STC > 0 ))
+    then
         log_hc "$0" ${_STC} "${_MSG}" "${_CURR_OPTS}" "${_CONFIG_OPTS}"
+    fi
     _STC=0
 done
 
@@ -131,11 +161,13 @@ function _show_usage
 cat <<- EOT
 NAME        : $1
 VERSION     : $2
-CONFIG  : $3 with formatted stanzas:
+CONFIG      : $3 with parameters:
+                log_healthy=<yes|no>
+                ignore_missing_fs=<yes|no>
+              and formatted stanzas:
                 fs:<my_fs1>:<my_fs_opts1>
-          Other options:
-            ignore_missing_fs=yes|no
 PURPOSE     : Checks whether file systems are mounted with correct options
+LOG HEALTHY : Supported
 
 EOT
 

sources/lib/platform/hp-ux/check_hpux_fs_usage.sh

@@ -27,6 +27,7 @@
 # @(#) 2019-01-30: refactored to support custom defintions with all
 #                  filesystems check [Patrick Van der Veken]
 # @(#) 2019-02-18: fixes + help update
+# @(#) 2019-03-09: text fixes
 # -----------------------------------------------------------------------------
 # DO NOT CHANGE THIS FILE UNLESS YOU KNOW WHAT YOU ARE DOING!
 #******************************************************************************
@@ -36,7 +37,7 @@ function check_hpux_fs_usage
 {
 # ------------------------- CONFIGURATION starts here -------------------------
 typeset _CONFIG_FILE="${CONFIG_DIR}/$0.conf"
-typeset _VERSION="2019-02-18"                           # YYYY-MM-DD
+typeset _VERSION="2019-03-09"                           # YYYY-MM-DD
 typeset _SUPPORTED_PLATFORMS="HP-UX"                    # uname -s match
 # ------------------------- CONFIGURATION ends here ---------------------------
 
@@ -291,15 +292,17 @@ function _show_usage
 cat <<- EOT
 NAME        : $1
 VERSION     : $2
-CONFIG  : $3 with formatted stanzas (optional):
+CONFIG      : $3 with parameters:
-            fs:<fs_name>:<max_inodes_usage_in_%>:<max_space_usage_in%>
-          Other options:
                 log_healthy=<yes|no>
                 check_inodes_usage=<yes|no>
                 check_space_usage=<yes|no>
                 max_inodes_usage=<general_inodes_usage_treshold>
                 max_space_usage=<general_space_usage_treshold>
+              with formatted stanzas (optional):
+                fs:<fs_name>:<max_inodes_usage_%>:<max_space_usage_%>
+EXT OPTIONS : --hc-args=check_inodes, --hc-args=check_space
 PURPOSE     : Checks the inodes & space usage for the configured or all (local) filesystems
+LOG HEALTHY : Supported
 
 EOT
 

sources/lib/platform/hp-ux/check_hpux_guid_status.sh

@@ -25,6 +25,7 @@
 # @(#) 2017-05-18: initial version [Patrick Van der Veken]
 # @(#) 2018-10-28: fixed (linter) errors [Patrick Van der Veken]
 # @(#) 2019-01-24: arguments fix [Patrick Van der Veken]
+# @(#) 2019-03-09: added support for --log-healthy [Patrick Van der Veken]
 # -----------------------------------------------------------------------------
 # DO NOT CHANGE THIS FILE UNLESS YOU KNOW WHAT YOU ARE DOING!
 #******************************************************************************
@@ -33,7 +34,7 @@
 function check_hpux_guid_status
 {
 # ------------------------- CONFIGURATION starts here -------------------------
-typeset _VERSION="2019-01-24"                           # YYYY-MM-DD
+typeset _VERSION="2019-03-09"                           # YYYY-MM-DD
 typeset _SUPPORTED_PLATFORMS="HP-UX"                    # uname -s match
 # ------------------------- CONFIGURATION ends here ---------------------------
 
@@ -45,6 +46,7 @@ typeset _ARG=""
 typeset _GUID_PID=""
 typeset _MSG=""
 typeset _STC=0
+typeset _LOG_HEALTHY=0
 typeset _RC=0
 
 # handle arguments (originally comma-separated)
@@ -57,6 +59,20 @@ do
     esac
 done
 
+# log_healthy
+(( ARG_LOG_HEALTHY > 0 )) && _LOG_HEALTHY=1
+if (( _LOG_HEALTHY > 0 ))
+then
+    if (( ARG_LOG > 0 ))
+    then
+        log "logging/showing passed health checks"
+    else
+        log "showing passed health checks (but not logging)"
+    fi
+else
+    log "not logging/showing passed health checks"
+fi
+
 # ---- process state ----
 # 1) try using the PID way
 if [[ -r "${_GUID_PID_FILE}" ]]
@@ -101,8 +117,11 @@ case ${_STC} in
         ;;
 esac
 
-# handle results
+# report result
+if (( _LOG_HEALTHY > 0 || _STC > 0 ))
+then
     log_hc "$0" ${_STC} "${_MSG}"
+fi
 
 return 0
 }
@@ -113,8 +132,8 @@ function _show_usage
 cat <<- EOT
 NAME        : $1
 VERSION     : $2
-CONFIG  : $3
 PURPOSE     : Checks whether guid daemons (VSP GUID) are running
+LOG HEALTHY : Supported
 
 EOT
 

sources/lib/platform/hp-ux/check_hpux_hpvm_vpar_status.sh

@@ -27,6 +27,8 @@
 # @(#) 2018-05-20: added dump_logs() [Patrick Van der Veken]
 # @(#) 2018-10-28: fixed (linter) errors [Patrick Van der Veken]
 # @(#) 2019-01-24: arguments fix [Patrick Van der Veken]
+# @(#) 2019-03-09: added code for data_is_numeric(), changed format of configuration
+# @(#)             file (; -> :) & added support for --log-healthy [Patrick Van der Veken]
 # -----------------------------------------------------------------------------
 # DO NOT CHANGE THIS FILE UNLESS YOU KNOW WHAT YOU ARE DOING!
 #******************************************************************************
@@ -37,7 +39,7 @@ function check_hpux_hpvm_vpar_status
 # ------------------------- CONFIGURATION starts here -------------------------
 typeset _CONFIG_FILE="${CONFIG_DIR}/$0.conf"
 typeset _HPVMSTATUS_BIN="/opt/hpvm/bin/hpvmstatus"
-typeset _VERSION="2019-01-24"                           # YYYY-MM-DD
+typeset _VERSION="2019-03-09"                           # YYYY-MM-DD
 typeset _SUPPORTED_PLATFORMS="HP-UX"                    # uname -s match
 # ------------------------- CONFIGURATION ends here ---------------------------
 
@@ -57,6 +59,8 @@ typeset _PAR_ENTRY=""
 typeset _PAR_MATCH=""
 typeset _MSG=""
 typeset _STC=0
+typeset _CFG_HEALTHY=""
+typeset _LOG_HEALTHY=0
 typeset _RC=0
 
 # handle arguments (originally comma-separated)
@@ -69,6 +73,46 @@ do
     esac
 done
 
+# handle configuration file
+[[ -n "${ARG_CONFIG_FILE}" ]] && _CONFIG_FILE="${ARG_CONFIG_FILE}"
+if [[ ! -r ${_CONFIG_FILE} ]]
+then
+    warn "unable to read configuration file at ${_CONFIG_FILE}"
+    return 1
+fi
+_CFG_HEALTHY=$(_CONFIG_FILE="${_CONFIG_FILE}" data_get_lvalue_from_config 'log_healthy')
+case "${_CFG_HEALTHY}" in
+    yes|YES|Yes)
+        _LOG_HEALTHY=1
+        ;;
+    *)
+        # do not override hc_arg
+        (( _LOG_HEALTHY > 0 )) || _LOG_HEALTHY=0
+        ;;
+esac
+
+# check for old-style configuration file (non-prefixed stanzas)
+_IS_OLD_STYLE=$(grep -c -E -e "^vpar:" ${_CONFIG_FILE} 2>/dev/null)
+if (( _IS_OLD_STYLE == 0 ))
+then
+    warn "no 'vpar:' stanza(s) found in ${_CONFIG_FILE}; possibly an old-style configuration?"
+    return 1
+fi
+
+# log_healthy
+(( ARG_LOG_HEALTHY > 0 )) && _LOG_HEALTHY=1
+if (( _LOG_HEALTHY > 0 ))
+then
+    if (( ARG_LOG > 0 ))
+    then
+        log "logging/showing passed health checks"
+    else
+        log "showing passed health checks (but not logging)"
+    fi
+else
+    log "not logging/showing passed health checks"
+fi
+
 # check HPVM
 if [[ ! -x ${_HPVMSTATUS_BIN} || -z "${_HPVMSTATUS_BIN}" ]]
 then
@@ -86,24 +130,14 @@ ${_HPVMSTATUS_BIN} -M >>${HC_STDOUT_LOG} 2>>${HC_STDERR_LOG}
 }
 
 # check configuration values
-grep -v -E -e '^$' -e '^#' ${_CONFIG_FILE} 2>/dev/null | while read _PAR_ENTRY
+grep -E -e "^vpar:" ${_CONFIG_FILE} 2>/dev/null | while IFS=":" read -r _ _PAR_ID _PAR_CFG_STATUS _PAR_CFG_BOOT
 do
-    # field split
-    _PAR_ID=$(print "${_PAR_ENTRY}" | cut -f1 -d';')
-    _PAR_CFG_STATUS=$(data_lc "$(print \"${_PAR_ENTRY}\" | cut -f2 -d';')")
-    _PAR_CFG_BOOT=$(data_lc "$(print \"${_PAR_ENTRY}\" | cut -f3 -d';')")
-
     # check configuration
-    case "${_PAR_ID}" in
+    data_is_numeric "${_PAR_ID}"
-        +([0-9])*(.)*([0-9]))
+    if (( $? > 0 ))
-            # numeric, OK
+    then
-            ;;
-        *)
-            # not numeric
         warn "invalid partition ID '${_PAR_ID}' in configuration file ${_CONFIG_FILE} at data line ${_LINE_COUNT}"
-            return 1
+    fi
-            ;;
-    esac
     case "${_PAR_CFG_STATUS}" in
         on|off)
             ;;
@@ -124,13 +158,8 @@ do
 done
 
 # perform checks
-grep -v -E -e '^$' -e '^#' ${_CONFIG_FILE} 2>/dev/null | while read _PAR_ENTRY
+grep -E -e "^vpar:" ${_CONFIG_FILE} 2>/dev/null | while IFS=":" read -r _ _PAR_ID _PAR_CFG_STATUS _PAR_CFG_BOOT
 do
-    # field split
-    _PAR_ID=$(print "${_PAR_ENTRY}" | cut -f1 -d';')
-    _PAR_CFG_STATUS=$(data_lc "$(print \"${_PAR_ENTRY}\" | cut -f2 -d';')")
-    _PAR_CFG_BOOT=$(data_lc "$(print \"${_PAR_ENTRY}\" | cut -f3 -d';')")
-
     # check run-time values (we need to make the needle sufficiently less greedy)
     _PAR_MATCH=$(grep -i "^.*:.*:${_PAR_ID}::Integrity" ${HC_STDOUT_LOG} 2>/dev/null)
     if [[ -n "${_PAR_MATCH}" ]]
@@ -157,7 +186,10 @@ do
              _MSG="partition ${_PAR_ID} has a wrong boot flag [${_PAR_RUN_BOOT}]"
              _STC=1
         fi
+        if (( _LOG_HEALTHY > 0 || _STC > 0 ))
+        then
             log_hc "$0" ${_STC} "${_MSG}" "${_PAR_RUN_BOOT}" "${_PAR_CFG_BOOT}"
+        fi
     else
         warn "could not determine status for partition ${_PAR_ID} from command output {${_HPVMSTATUS_BIN}}"
         _RC=1
@@ -173,9 +205,12 @@ function _show_usage
 cat <<- EOT
 NAME        : $1
 VERSION     : $2
-CONFIG  : $3 with:
+CONFIG      : $3 with parameters:
-            <parid>;<runtime_status>;<boot_status>
+                log_healthy=<yes|no>
+              and formatted stanzas:
+                vpar:<parid>:<runtime_status>:<boot_status>
 PURPOSE     : Checks the status of vPars (on a VSP)
+LOG HEALTHY : Supported
 
 EOT
 

sources/lib/platform/hp-ux/check_hpux_httpd_status.sh

@@ -25,6 +25,7 @@
 # @(#) 2017-04-23: initial version [Patrick Van der Veken]
 # @(#) 2018-10-28: fixed (linter) errors [Patrick Van der Veken]
 # @(#) 2019-01-24: arguments fix [Patrick Van der Veken]
+# @(#) 2019-03-09: added support for --log-healthy [Patrick Van der Veken]
 # -----------------------------------------------------------------------------
 # DO NOT CHANGE THIS FILE UNLESS YOU KNOW WHAT YOU ARE DOING!
 #******************************************************************************
@@ -34,7 +35,7 @@ function check_hpux_httpd_status
 {
 # ------------------------- CONFIGURATION starts here -------------------------
 typeset _HTTPD_PID_FILE="/var/run/httpd/httpd.pid"
-typeset _VERSION="2019-01-24"                           # YYYY-MM-DD
+typeset _VERSION="2019-03-09"                           # YYYY-MM-DD
 typeset _SUPPORTED_PLATFORMS="HP-UX"                    # uname -s match
 # ------------------------- CONFIGURATION ends here ---------------------------
 
@@ -47,6 +48,7 @@ typeset _HTTPD_BIN=""
 typeset _HTTPD_PID=""
 typeset _MSG=""
 typeset _STC=0
+typeset _LOG_HEALTHY=0
 typeset _RC=0
 
 # handle arguments (originally comma-separated)
@@ -59,6 +61,20 @@ do
     esac
 done
 
+# log_healthy
+(( ARG_LOG_HEALTHY > 0 )) && _LOG_HEALTHY=1
+if (( _LOG_HEALTHY > 0 ))
+then
+    if (( ARG_LOG > 0 ))
+    then
+        log "logging/showing passed health checks"
+    else
+        log "showing passed health checks (but not logging)"
+    fi
+else
+    log "not logging/showing passed health checks"
+fi
+
 # ---- process state ----
 # 1) try using the PID way
 if [[ -r "${_HTTPD_PID_FILE}" ]]
@@ -94,7 +110,11 @@ case ${_STC} in
         _MSG="could not determine status of httpd"
         ;;
 esac
+# report result
+if (( _LOG_HEALTHY > 0 || _STC > 0 ))
+then
     log_hc "$0" ${_STC} "${_MSG}"
+fi
 
 # ---- config state ----
 _HTTPD_BIN="$(which httpd 2>>${HC_STDERR_LOG})"
@@ -110,8 +130,12 @@ then
         _MSG="httpd configuration files have syntax error(s) {httpd -s}"
         _STC=1
     fi
+    # report result
+    if (( _LOG_HEALTHY > 0 || _STC > 0 ))
+    then
         log_hc "$0" ${_STC} "${_MSG}"
     fi
+fi
 
 return 0
 }
@@ -122,8 +146,8 @@ function _show_usage
 cat <<- EOT
 NAME        : $1
 VERSION     : $2
-CONFIG  : $3
 PURPOSE     : Checks whether httpd (apache) is running
+LOG HEALTHY : Supported
 
 EOT
 

sources/lib/platform/hp-ux/check_hpux_ignite_backup.sh

@@ -19,7 +19,7 @@
 # @(#) MAIN: check_hpux_ignite_backup
 # DOES: see _show_usage()
 # EXPECTS: see _show_usage()
-# REQUIRES: data_comma2space(), init_hc(), log_hc()
+# REQUIRES: data_comma2space(), init_hc(), log_hc(), warn()
 #
 # @(#) HISTORY:
 # @(#) 2013-05-28: initial version [Patrick Van der Veken]
@@ -28,7 +28,8 @@
 # @(#) 2016-06-03: small fix [Patrick Van der Veken]
 # @(#) 2018-10-28: fixed (linter) errors [Patrick Van der Veken]
 # @(#) 2019-01-24: arguments fix [Patrick Van der Veken]
-# @(#) 2019-01-31: Improve discovery routine + add log_healthy [Patrick Van der Veken] 
+# @(#) 2019-01-31: improve discovery routine + add log_healthy [Patrick Van der Veken]
+# @(#) 2019-03-09: text updates [Patrick Van der Veken]
 # -----------------------------------------------------------------------------
 # DO NOT CHANGE THIS FILE UNLESS YOU KNOW WHAT YOU ARE DOING!
 #******************************************************************************
@@ -42,7 +43,7 @@ typeset _CONFIG_FILE="${CONFIG_DIR}/$0.conf"
 typeset _IGNITE_NEEDLE="^DONE"
 typeset _IGNITE_SERVER_FILE="/var/opt/ignite/server/ignite.defs"
 typeset _IGNITE_CLIENTS_DIR="/var/opt/ignite/clients"
-typeset _VERSION="2019-01-31"                           # YYYY-MM-DD
+typeset _VERSION="2019-03-09"                           # YYYY-MM-DD
 typeset _SUPPORTED_PLATFORMS="HP-UX"                    # uname -s match
 # ------------------------- CONFIGURATION ends here ---------------------------
 
@@ -246,8 +247,10 @@ function _show_usage
 cat <<- EOT
 NAME        : $1
 VERSION     : $2
-CONFIG  : $3 with:
+CONFIG      : $3 with parameters:
+                log_healthy=<yes|no>
                 backup_age=<days_till_last_backup>
+                exclude_hosts=<list_of_hosts>
 PURPOSE     : Checks the state and age of saved Ignite-UX client backups (should only be
               run only on the Ignite-UX server). Backups with warnings are considered
               to OK. Backups older than \$backup_age will not pass the health check.

sources/lib/platform/hp-ux/check_hpux_ioscan.sh

@@ -31,6 +31,7 @@
 # @(#) 2018-05-20: added dump_logs() [Patrick Van der Veken]
 # @(#) 2018-10-28: fixed (linter) errors [Patrick Van der Veken]
 # @(#) 2019-01-24: arguments fix [Patrick Van der Veken]
+# @(#) 2019-03-09: added support for --log-healthy [Patrick Van der Veken]
 # -----------------------------------------------------------------------------
 # DO NOT CHANGE THIS FILE UNLESS YOU KNOW WHAT YOU ARE DOING!
 #******************************************************************************
@@ -42,7 +43,7 @@ function check_hpux_ioscan
 typeset _CONFIG_FILE="${CONFIG_DIR}/$0.conf"
 typeset _IOSCAN_BIN="/usr/sbin/ioscan"
 typeset _IOSCAN_OPTS="-Fn"
-typeset _VERSION="2019-01-24"                           # YYYY-MM-DD
+typeset _VERSION="2019-03-09"                           # YYYY-MM-DD
 typeset _SUPPORTED_PLATFORMS="HP-UX"                    # uname -s match
 # ------------------------- CONFIGURATION ends here ---------------------------
 
@@ -54,6 +55,8 @@ typeset _ARG=""
 typeset _MSG=""
 typeset _STC=0
 typeset _STC_COUNT=0
+typeset _CFG_HEALTHY=""
+typeset _LOG_HEALTHY=0
 typeset _CLASS_LINE=""
 typeset _IOSCAN_CLASSES=""
 typeset _AGILE_VIEW=""
@@ -102,6 +105,30 @@ then
     # default
     _AGILE_VIEW="yes"
 fi
+_CFG_HEALTHY=$(_CONFIG_FILE="${_CONFIG_FILE}" data_get_lvalue_from_config 'log_healthy')
+case "${_CFG_HEALTHY}" in
+    yes|YES|Yes)
+        _LOG_HEALTHY=1
+        ;;
+    *)
+        # do not override hc_arg
+        (( _LOG_HEALTHY > 0 )) || _LOG_HEALTHY=0
+        ;;
+esac
+
+# log_healthy
+(( ARG_LOG_HEALTHY > 0 )) && _LOG_HEALTHY=1
+if (( _LOG_HEALTHY > 0 ))
+then
+    if (( ARG_LOG > 0 ))
+    then
+        log "logging/showing passed health checks"
+    else
+        log "showing passed health checks (but not logging)"
+    fi
+else
+    log "not logging/showing passed health checks"
+fi
 
 # check and get ioscan stuff
 if [[ ! -x ${_IOSCAN_BIN} ]]
@@ -163,12 +190,16 @@ do
             continue
     esac
 
+    # report result
+    if (( _LOG_HEALTHY > 0 || _STC > 0 ))
+    then
         log_hc "$0" ${_STC} "${_MSG}"
+    fi
     _STC=0
 done
 
 # report OK situation
-if (( _STC_COUNT == 0 ))
+if (( _LOG_HEALTHY > 0 && _STC_COUNT == 0 ))
 then
     _MSG="no problems detected by {${_IOSCAN_BIN}}"
     log_hc "$0" 0 "${_MSG}"
@@ -184,10 +215,13 @@ cat <<- EOT
 NAME        : $1
 VERSION     : $2
 CONFIG      : $3 with:
+CONFIG      : $3 with parameters:
+                log_healthy=<yes|no>
                 ioscan_classes=<list_of_device_classes_to_check>
                 kernel_mode=<yes|no>
                 agile_view=<yes|no>
 PURPOSE     : Checks whether 'ioscan' returns errors or not (NO_HW, ERROR)
+LOG HEALTHY : Supported
 
 EOT
 

sources/lib/platform/hp-ux/check_hpux_kernel_params.sh

@@ -27,6 +27,7 @@
 # @(#) 2018-05-20: added dump_logs() [Patrick Van der Veken]
 # @(#) 2018-10-28: fixed (linter) errors [Patrick Van der Veken]
 # @(#) 2019-01-24: arguments fix [Patrick Van der Veken]
+# @(#) 2019-03-09: added support for --log-healthy [Patrick Van der Veken]
 # -----------------------------------------------------------------------------
 # DO NOT CHANGE THIS FILE UNLESS YOU KNOW WHAT YOU ARE DOING!
 #******************************************************************************
@@ -37,7 +38,7 @@ function check_hpux_kernel_params
 # ------------------------- CONFIGURATION starts here -------------------------
 typeset _CONFIG_FILE="${CONFIG_DIR}/$0.conf"
 typeset _KCTUNE_BIN="/usr/sbin/kctune"
-typeset _VERSION="2019-01-24"                           # YYYY-MM-DD
+typeset _VERSION="2019-03-09"                           # YYYY-MM-DD
 typeset _SUPPORTED_PLATFORMS="HP-UX"                    # uname -s match
 # ------------------------- CONFIGURATION ends here ---------------------------
 
@@ -48,6 +49,8 @@ typeset _ARGS=$(data_comma2space "$*")
 typeset _ARG=""
 typeset _MSG=""
 typeset _STC=0
+typeset _CFG_HEALTHY=""
+typeset _LOG_HEALTHY=0
 typeset _PARAM_NAME=""
 typeset _CONFIG_VALUE=""
 typeset _CURR_VALUE=""
@@ -73,6 +76,30 @@ then
     warn "unable to read configuration file at ${_CONFIG_FILE}"
     return 1
 fi
+_CFG_HEALTHY=$(_CONFIG_FILE="${_CONFIG_FILE}" data_get_lvalue_from_config 'log_healthy')
+case "${_CFG_HEALTHY}" in
+    yes|YES|Yes)
+        _LOG_HEALTHY=1
+        ;;
+    *)
+        # do not override hc_arg
+        (( _LOG_HEALTHY > 0 )) || _LOG_HEALTHY=0
+        ;;
+esac
+
+# log_healthy
+(( ARG_LOG_HEALTHY > 0 )) && _LOG_HEALTHY=1
+if (( _LOG_HEALTHY > 0 ))
+then
+    if (( ARG_LOG > 0 ))
+    then
+        log "logging/showing passed health checks"
+    else
+        log "showing passed health checks (but not logging)"
+    fi
+else
+    log "not logging/showing passed health checks"
+fi
 
 # check & get kctune information
 if [[ ! -x ${_KCTUNE_BIN} ]]
@@ -140,8 +167,11 @@ do
         _REPORTED_VALUE="${_EXPR_VALUE}"
     fi
 
-    # handle unit result
+    # report result
+    if (( _LOG_HEALTHY > 0 || _STC > 0 ))
+    then
         log_hc "$0" ${_STC} "${_MSG}" "${_REPORTED_VALUE}" "${_CONFIG_VALUE}"
+    fi
     _STC=0
 done
 
@@ -154,9 +184,12 @@ function _show_usage
 cat <<- EOT
 NAME        : $1
 VERSION     : $2
-CONFIG  : $3 with formatted stanzas:
+CONFIG      : $3 with parameters:
-            param:<my_param1>:<my_param1_value>
+                log_healthy=<yes|no>
+              and formatted stanzas:
+                param:<param_name>:<param_value>
 PURPOSE     : Checks kernel parameters have a correct run-time value/expression
+LOG HEALTHY : Supported
 
 EOT
 

sources/lib/platform/hp-ux/check_hpux_kernel_usage.sh

@@ -19,7 +19,8 @@
 # @(#) MAIN: check_hpux_kernel_usage
 # DOES: see _show_usage()
 # EXPECTS: see _show_usage()
-# REQUIRES: data_comma2space(), dump_logs(), init_hc(), log_hc()
+# REQUIRES: data_comma2space(), data_is_numeric(), dump_logs(), init_hc(),
+#           log_hc(), warn()
 #
 # @(#) HISTORY:
 # @(#) 2017-12-22: original version [Patrick Van der Veken]
@@ -28,6 +29,8 @@
 # @(#) 2018-05-20: added dump_logs() [Patrick Van der Veken]
 # @(#) 2018-10-28: fixed (linter) errors [Patrick Van der Veken]
 # @(#) 2019-01-24: arguments fix [Patrick Van der Veken]
+# @(#) 2019-03-09: added code for data_is_numeric() &
+# @(#)             support for --log-healthy [Patrick Van der Veken]
 # -----------------------------------------------------------------------------
 # DO NOT CHANGE THIS FILE UNLESS YOU KNOW WHAT YOU ARE DOING!
 #******************************************************************************
@@ -38,7 +41,7 @@ function check_hpux_kernel_usage
 # ------------------------- CONFIGURATION starts here -------------------------
 typeset _CONFIG_FILE="${CONFIG_DIR}/$0.conf"
 typeset _KCUSAGE_BIN="/usr/sbin/kcusage"
-typeset _VERSION="2019-01-24"                           # YYYY-MM-DD
+typeset _VERSION="2019-03-09"                           # YYYY-MM-DD
 typeset _SUPPORTED_PLATFORMS="HP-UX"                    # uname -s match
 # ------------------------- CONFIGURATION ends here ---------------------------
 
@@ -49,6 +52,8 @@ typeset _ARGS=$(data_comma2space "$*")
 typeset _ARG=""
 typeset _MSG=""
 typeset _STC=0
+typeset _CFG_HEALTHY=""
+typeset _LOG_HEALTHY=0
 typeset _MAX_KCUSAGE=0
 typeset _EXCLUDED_PARAMS=""
 typeset _HANDLED_PARAMS=""
@@ -90,6 +95,30 @@ if [[ -n "${_EXCLUDED_PARAMS}" ]]
 then
     log "excluding following kernel parameters: ${_EXCLUDED_PARAMS}"
 fi
+_CFG_HEALTHY=$(_CONFIG_FILE="${_CONFIG_FILE}" data_get_lvalue_from_config 'log_healthy')
+case "${_CFG_HEALTHY}" in
+    yes|YES|Yes)
+        _LOG_HEALTHY=1
+        ;;
+    *)
+        # do not override hc_arg
+        (( _LOG_HEALTHY > 0 )) || _LOG_HEALTHY=0
+        ;;
+esac
+
+# log_healthy
+(( ARG_LOG_HEALTHY > 0 )) && _LOG_HEALTHY=1
+if (( _LOG_HEALTHY > 0 ))
+then
+    if (( ARG_LOG > 0 ))
+    then
+        log "logging/showing passed health checks"
+    else
+        log "showing passed health checks (but not logging)"
+    fi
+else
+    log "not logging/showing passed health checks"
+fi
 
 # check & get kcusage information
 if [[ ! -x ${_KCUSAGE_BIN} ]]
@@ -126,21 +155,19 @@ do
         return 1
     fi
     # check if the threshold value is correct (integer)
-    case "${_CONFIG_VALUE}" in
+    data_is_numeric "${_CONFIG_VALUE}"
-        [0-9]*)
+    if (( $? == 0 ))
-            # numeric, OK
+    then
         if (( _CONFIG_VALUE < 1 || _CONFIG_VALUE > 99 ))
         then
             warn "incorrect threshold value '${_CONFIG_VALUE}' in configuration file ${_CONFIG_FILE} at data line ${_LINE_COUNT}"
             return 1
         fi
-            ;;
+    else
-        *)
         # not numeric
         warn "invalid threshold value '${_CONFIG_VALUE}' in configuration file ${_CONFIG_FILE} at data line ${_LINE_COUNT}"
         return 1
-            ;;
+    fi
-    esac
     _LINE_COUNT=$(( _LINE_COUNT + 1 ))
 done
 
@@ -164,8 +191,11 @@ do
     # push to handled list
     _HANDLED_PARAMS="${_HANDLED_PARAMS}\n${_PARAM_NAME}"
 
-    # handle unit result
+    # report result
+    if (( _LOG_HEALTHY > 0 || _STC > 0 ))
+    then
         log_hc "$0" ${_STC} "${_MSG}" "${_CHECK_VALUE}" "${_CONFIG_VALUE}"
+    fi
     _STC=0
 done
 
@@ -198,8 +228,11 @@ do
             _MSG="${_PARAM_NAME} is below the general threshold (${_CHECK_VALUE}% <= ${_MAX_KCUSAGE}%)"
         fi
 
-        # handle unit result
+        # report result
+        if (( _LOG_HEALTHY > 0 || _STC > 0 ))
+        then
             log_hc "$0" ${_STC} "${_MSG}" "${_CHECK_VALUE}" "${_MAX_KCUSAGE}"
+        fi
         _STC=0
     fi
 done
@@ -213,12 +246,14 @@ function _show_usage
 cat <<- EOT
 NAME        : $1
 VERSION     : $2
-CONFIG  : $3 with formatted stanzas:
+CONFIG      : $3 with parameters:
-            param:<my_param1>:<my_param1_threshold_%>
+                log_healthy=<yes|no>
-          Other options:
                 max_kcusage=<threshold_%>
-            exclude_params=<list_of_exluded_parameters>
+                exclude_params=<list_of_excluded_parameters>
+              and formatted stanzas:
+                param:<param_name>:<param_value>
 PURPOSE     : Checks the current usage of kernel paremeter resources
+LOG HEALTHY : Supported
 
 EOT
 

sources/lib/platform/hp-ux/check_hpux_lunpaths.sh

@@ -27,6 +27,7 @@
 # @(#)             [Patrick Van der Veken]
 # @(#) 2018-11-18: do not trap on signal 0 [Patrick Van der Veken]
 # @(#) 2019-01-24: arguments fix [Patrick Van der Veken]
+# @(#) 2019-09-03: small variable fix [Patrick Van der Veken]
 # -----------------------------------------------------------------------------
 # DO NOT CHANGE THIS FILE UNLESS YOU KNOW WHAT YOU ARE DOING!
 #******************************************************************************
@@ -39,7 +40,7 @@ typeset _IOSCAN_BIN="/usr/sbin/ioscan"
 typeset _IOSCAN_OPTS="-C disk -P wwid"
 typeset _SCSIMGR_BIN="/usr/sbin/scsimgr"
 typeset _SCSIMGR_OPTS="-v get_info all_lun"
-typeset _VERSION="2019-01-24"                           # YYYY-MM-DD
+typeset _VERSION="2019-03-09"                           # YYYY-MM-DD
 typeset _SUPPORTED_PLATFORMS="HP-UX"                    # uname -s match
 # ------------------------- CONFIGURATION ends here ---------------------------
 
@@ -58,7 +59,6 @@ typeset _ACTIVE_PATH_COUNT=""
 typeset _ALL_PATH_COUNT=""
 typeset _FAILED_PATH_COUNT=""
 typeset _STANDBY_PATH_COUNT=""
-typeset _WWID=""
 
 # handle arguments (originally comma-separated)
 for _ARG in ${_ARGS}
@@ -210,7 +210,7 @@ awk 'BEGIN { wwid = ""; active_paths = ""; all_paths = ""; failed_paths = ""; st
             print wwid "|" disks[wwid] "|" paths_active[wwid] "|" paths_all[wwid] "|" paths_failed[wwid] "|" paths_standby[wwid]
         }
     }' ${_TMP1_FILE} ${_TMP2_FILE} 2>/dev/null |\
-while IFS='|' read -r _WWID _HW_PATH _ACTIVE_PATH_COUNT _ALL_PATH_COUNT _FAILED_PATH_COUNT _STANDBY_PATH_COUNT
+while IFS='|' read -r _ _HW_PATH _ACTIVE_PATH_COUNT _ALL_PATH_COUNT _FAILED_PATH_COUNT _STANDBY_PATH_COUNT
 do
     if [[ -z "${_ACTIVE_PATH_COUNT}" ]] ||
        [[ -z "${_ALL_PATH_COUNT}" ]] ||
@@ -261,8 +261,8 @@ function _show_usage
 cat <<- EOT
 NAME        : $1
 VERSION     : $2
-
 PURPOSE     : Check the active and failed (non-active) lunpaths of DISK devices
+LOG HEALTHY : Supported
 
 EOT
 

sources/lib/platform/hp-ux/check_hpux_named_status.sh

@@ -24,6 +24,7 @@
 # @(#) HISTORY:
 # @(#) 2017-01-07: initial version [Patrick Van der Veken]
 # @(#) 2019-01-24: arguments fix [Patrick Van der Veken]
+# @(#) 2019-03-09: added support for --log-healthy [Patrick Van der Veken]
 # -----------------------------------------------------------------------------
 # DO NOT CHANGE THIS FILE UNLESS YOU KNOW WHAT YOU ARE DOING!
 #******************************************************************************
@@ -33,7 +34,7 @@ function check_hpux_named_status
 {
 # ------------------------- CONFIGURATION starts here -------------------------
 typeset _NAMED_PID_FILE="/var/run/named/named.pid"
-typeset _VERSION="2019-01-24"                           # YYYY-MM-DD
+typeset _VERSION="2019-03-09"                           # YYYY-MM-DD
 typeset _SUPPORTED_PLATFORMS="HP-UX"                    # uname -s match
 # ------------------------- CONFIGURATION ends here ---------------------------
 
@@ -46,6 +47,7 @@ typeset _ARGS=$(data_comma2space "$*")
 typeset _ARG=""
 typeset _MSG=""
 typeset _STC=0
+typeset _LOG_HEALTHY=0
 typeset _RC=0
 
 # handle arguments (originally comma-separated)
@@ -58,6 +60,20 @@ do
     esac
 done
 
+# log_healthy
+(( ARG_LOG_HEALTHY > 0 )) && _LOG_HEALTHY=1
+if (( _LOG_HEALTHY > 0 ))
+then
+    if (( ARG_LOG > 0 ))
+    then
+        log "logging/showing passed health checks"
+    else
+        log "showing passed health checks (but not logging)"
+    fi
+else
+    log "not logging/showing passed health checks"
+fi
+
 # ---- process state ----
 # 1) try using the PID way
 if [[ -r "${_NAMED_PID_FILE}" ]]
@@ -93,7 +109,11 @@ case ${_STC} in
         _MSG="could not determine status of named"
         ;;
 esac
+# report result
+if (( _LOG_HEALTHY > 0 || _STC > 0 ))
+then
     log_hc "$0" ${_STC} "${_MSG}"
+fi
 
 # ---- config state ----
 _NAMED_CHECKCONF_BIN="$(which named-checkconf 2>>${HC_STDERR_LOG})"
@@ -109,8 +129,12 @@ then
         _MSG="named configuration and/or zone files have syntax error(s) {named-checkconf -z}"
         _STC=1
     fi
+    # report result
+    if (( _LOG_HEALTHY > 0 || _STC > 0 ))
+    then
         log_hc "$0" ${_STC} "${_MSG}"
     fi
+fi
 
 return 0
 }
@@ -121,9 +145,9 @@ function _show_usage
 cat <<- EOT
 NAME        : $1
 VERSION     : $2
-CONFIG  : $3
 PURPOSE     : Checks whether named (BIND) service is running and whether the named
               zone files are syntactically correct.
+LOG HEALTHY : Supported
 
 EOT
 

sources/lib/platform/hp-ux/check_hpux_ntp_status.sh

@@ -29,6 +29,7 @@
 # @(#) 2019-01-10: added configuration option 'ntpq_use_ipv4', fixed problem
 # @(#)             with offset calculation [Patrick Van der Veken]
 # @(#) 2019-01-24: arguments fix [Patrick Van der Veken]
+# @(#) 2019-03-09: Text updates [Patrick Van der Veken]
 # -----------------------------------------------------------------------------
 # DO NOT CHANGE THIS FILE UNLESS YOU KNOW WHAT YOU ARE DOING!
 #------------------------------------------------------------------------------
@@ -38,7 +39,7 @@ function check_hpux_ntp_status
 {
 # ------------------------- CONFIGURATION starts here -------------------------
 typeset _CONFIG_FILE="${CONFIG_DIR}/$0.conf"
-typeset _VERSION="2019-01-24"                           # YYYY-MM-DD
+typeset _VERSION="2019-03-09"                           # YYYY-MM-DD
 typeset _SUPPORTED_PLATFORMS="HP-UX"                    # uname -s match
 typeset _NTPQ_BIN="/usr/sbin/ntpq"
 typeset _NTPQ_OPTS="-pn"
@@ -183,7 +184,7 @@ function _show_usage
 cat <<- EOT
 NAME        : $1
 VERSION     : $2
-CONFIG      : $3 with:
+CONFIG      : $3 with parameters:
                 log_healthy=<yes|no>
                 max_offset=<max_offset (ms)>
                 force_chrony=<yes|no>

sources/lib/platform/hp-ux/check_hpux_ovpa_status.sh

@@ -29,6 +29,7 @@
 # @(#) 2018-10-22: small fixes [Patrick Van der Veken]
 # @(#) 2018-10-28: fixed (linter) errors [Patrick Van der Veken]
 # @(#) 2019-01-24: arguments fix [Patrick Van der Veken]
+# @(#) 2019-03-09: text updates [Patrick Van der Veken]
 # -----------------------------------------------------------------------------
 # DO NOT CHANGE THIS FILE UNLESS YOU KNOW WHAT YOU ARE DOING!
 #******************************************************************************
@@ -38,7 +39,7 @@ function check_hpux_ovpa_status
 {
 # ------------------------- CONFIGURATION starts here -------------------------
 typeset _CONFIG_FILE="${CONFIG_DIR}/$0.conf"
-typeset _VERSION="2019-01-24"                           # YYYY-MM-DD
+typeset _VERSION="2019-03-09"                           # YYYY-MM-DD
 typeset _SUPPORTED_PLATFORMS="HP-UX"                    # uname -s match
 typeset _OVPA_BIN="/opt/perf/bin/perfstat"
 # ------------------------- CONFIGURATION ends here ---------------------------
@@ -162,7 +163,8 @@ function _show_usage
 cat <<- EOT
 NAME        : $1
 VERSION     : $2
-CONFIG      : $3 with:
+CONFIG      : $3 with parameters:
+                log_healthy=<yes|no>
                 ovpa_daemons=<list_of_ovpa_processes_to_check>
 PURPOSE     : Checks the status of OVPA processes (OpenView Performance Agent)
 LOG HEALTHY : Supported

sources/lib/platform/hp-ux/check_hpux_patch_version.sh

@@ -29,6 +29,7 @@
 # @(#) 2018-10-28: fixed (linter) errors [Patrick Van der Veken]
 # @(#) 2019-01-24: arguments fix [Patrick Van der Veken]
 # @(#) 2019-02-19: fix in exclude checking [Patrick Van der Veken]
+# @(#) 2019-03-09: text updates [Patrick Van der Veken]
 # -----------------------------------------------------------------------------
 # DO NOT CHANGE THIS FILE UNLESS YOU KNOW WHAT YOU ARE DOING!
 #******************************************************************************
@@ -42,7 +43,7 @@ typeset _SWLIST_BIN="/usr/sbin/swlist"
 typeset _SWLIST_OPTS=""
 typeset _SHOW_PATCHES_BIN="/usr/contrib/bin/show_patches"
 typeset _SHOW_PATCHES_OPTS=""
-typeset _VERSION="2019-01-24"                           # YYYY-MM-DD
+typeset _VERSION="2019-03-09"                           # YYYY-MM-DD
 typeset _SUPPORTED_PLATFORMS="HP-UX"                    # uname -s match
 # ------------------------- CONFIGURATION ends here ---------------------------
 
@@ -258,7 +259,8 @@ function _show_usage
 cat <<- EOT
 NAME        : $1
 VERSION     : $2
-CONFIG  : $3 with:
+CONFIG      : $3 with parameters:
+                log_healthy=<yes|no>
                 required_patches=<list_of_patches_to_check>
                 required_oe=<OE_version>
                 check_filesets=<yes|no>
@@ -266,6 +268,7 @@ CONFIG  : $3 with:
 PURPOSE     : Checks whether the required OE (Operating Environment) version is installed
               Checks whether the required patches are installed
               Checks whether filesets are in a configured state
+LOG HEALTHY : Supported
 
 EOT
 

sources/lib/platform/hp-ux/check_hpux_postfix_status.sh

@@ -19,11 +19,12 @@
 # @(#) MAIN: check_hpux_postfix_status
 # DOES: see _show_usage()
 # EXPECTS: n/a
-# REQUIRES: data_comma2space(), init_hc(), log_hc()
+# REQUIRES: data_comma2space(), init_hc(), log_hc(), warn()
 #
 # @(#) HISTORY:
 # @(#) 2016-12-01: initial version [Patrick Van der Veken]
 # @(#) 2019-01-24: arguments fix [Patrick Van der Veken]
+# @(#) 2019-03-09: added support for --log-healthy [Patrick Van der Veken]
 # -----------------------------------------------------------------------------
 # DO NOT CHANGE THIS FILE UNLESS YOU KNOW WHAT YOU ARE DOING!
 #******************************************************************************
@@ -32,7 +33,7 @@
 function check_hpux_postfix_status
 {
 # ------------------------- CONFIGURATION starts here -------------------------
-typeset _VERSION="2019-01-24"                           # YYYY-MM-DD
+typeset _VERSION="2019-03-09"                           # YYYY-MM-DD
 typeset _SUPPORTED_PLATFORMS="HP-UX"                    # uname -s match
 # ------------------------- CONFIGURATION ends here ---------------------------
 
@@ -44,6 +45,7 @@ typeset _ARG=""
 typeset _POSTFIX_BIN=""
 typeset _MSG=""
 typeset _STC=0
+typeset _LOG_HEALTHY=0
 
 # handle arguments (originally comma-separated)
 for _ARG in ${_ARGS}
@@ -55,6 +57,20 @@ do
     esac
 done
 
+# log_healthy
+(( ARG_LOG_HEALTHY > 0 )) && _LOG_HEALTHY=1
+if (( _LOG_HEALTHY > 0 ))
+then
+    if (( ARG_LOG > 0 ))
+    then
+        log "logging/showing passed health checks"
+    else
+        log "showing passed health checks (but not logging)"
+    fi
+else
+    log "not logging/showing passed health checks"
+fi
+
 _POSTFIX_BIN="$(which postfix 2>>${HC_STDERR_LOG})"
 if [[ -x ${_POSTFIX_BIN} && -n "${_POSTFIX_BIN}" ]]
 then
@@ -71,8 +87,11 @@ else
     return 1
 fi
 
-# handle results
+# report result
+if (( _LOG_HEALTHY > 0 || _STC > 0 ))
+then
     log_hc "$0" ${_STC} "${_MSG}"
+fi
 
 return 0
 }
@@ -83,8 +102,8 @@ function _show_usage
 cat <<- EOT
 NAME        : $1
 VERSION     : $2
-CONFIG  : $3
 PURPOSE     : Checks whether postfix (mail system) is running
+LOG HEALTHY : Supported
 
 EOT
 

sources/lib/platform/hp-ux/check_hpux_root_crontab.sh

@@ -19,11 +19,13 @@
 # @(#) MAIN: check_hpux_root_crontab
 # DOES: see _show_usage()
 # EXPECTS: n/a
-# REQUIRES: data_comma2space(), init_hc(), log_hc()
+# REQUIRES: data_comma2space(), init_hc(), log_hc(), warn()
 #
 # @(#) HISTORY:
 # @(#) 2013-09-19: initial version [Patrick Van der Veken]
 # @(#) 2019-01-24: arguments fix [Patrick Van der Veken]
+# @(#) 2019-03-09: changed format of stanzas in configuration file &
+# @(#)             added support for --log-healthy [Patrick Van der Veken]
 # -----------------------------------------------------------------------------
 # DO NOT CHANGE THIS FILE UNLESS YOU KNOW WHAT YOU ARE DOING!
 #******************************************************************************
@@ -33,7 +35,7 @@ function check_hpux_root_crontab
 {
 # ------------------------- CONFIGURATION starts here -------------------------
 typeset _CONFIG_FILE="${CONFIG_DIR}/$0.conf"
-typeset _VERSION="2019-01-24"							# YYYY-MM-DD
+typeset _VERSION="2019-03-09"							# YYYY-MM-DD
 typeset _SUPPORTED_PLATFORMS="HP-UX"                    # uname -s match
 # ------------------------- CONFIGURATION ends here ---------------------------
 
@@ -44,8 +46,11 @@ typeset _ARGS=$(data_comma2space "$*")
 typeset _ARG=""
 typeset _MSG=""
 typeset _STC=0
+typeset _CFG_HEALTHY=""
+typeset _LOG_HEALTHY=0
 typeset _CRON_ENTRY=""
 typeset _CRON_MATCH=0
+typeset _IS_OLD_STYLE=0
 
 # handle arguments (originally comma-separated)
 for _ARG in ${_ARGS}
@@ -64,12 +69,44 @@ then
     warn "unable to read configuration file at ${_CONFIG_FILE}"
     return 1
 fi
+_CFG_HEALTHY=$(_CONFIG_FILE="${_CONFIG_FILE}" data_get_lvalue_from_config 'log_healthy')
+case "${_CFG_HEALTHY}" in
+    yes|YES|Yes)
+        _LOG_HEALTHY=1
+        ;;
+    *)
+        # do not override hc_arg
+        (( _LOG_HEALTHY > 0 )) || _LOG_HEALTHY=0
+        ;;
+esac
+
+# check for old-style configuration file (non-prefixed stanzas)
+_IS_OLD_STYLE=$(grep -c -E -e "^cron:" ${_CONFIG_FILE} 2>/dev/null)
+if (( _IS_OLD_STYLE == 0 ))
+then
+    warn "no 'cron:' stanza(s) found in ${_CONFIG_FILE}; possibly an old-style configuration?"
+    return 1
+fi
+
+# log_healthy
+(( ARG_LOG_HEALTHY > 0 )) && _LOG_HEALTHY=1
+if (( _LOG_HEALTHY > 0 ))
+then
+    if (( ARG_LOG > 0 ))
+    then
+        log "logging/showing passed health checks"
+    else
+        log "showing passed health checks (but not logging)"
+    fi
+else
+    log "not logging/showing passed health checks"
+fi
 
 # collect data
 crontab -l >>${HC_STDOUT_LOG} 2>>${HC_STDERR_LOG}
 
 # perform check
-grep -v -E -e '^$' -e '^#' ${_CONFIG_FILE} 2>/dev/null | while read _CRON_ENTRY
+grep -E -e "^cron:" ${_CONFIG_FILE} 2>/dev/null  | while IFS=":" read -r _ _CRON_ENTRY
 do
     _CRON_MATCH=$(grep -v '^#' ${HC_STDOUT_LOG} 2>/dev/null |\
     grep -c -E -e "${_CRON_ENTRY}")
@@ -86,8 +123,11 @@ do
             ;;
     esac
 
-    # handle unit result
+    # report result
+    if (( _LOG_HEALTHY > 0 || _STC > 0 ))
+    then
         log_hc "$0" ${_STC} "${_MSG}"
+    fi
     _STC=0
 done
 
@@ -100,8 +140,12 @@ function _show_usage
 cat <<- EOT
 NAME        : $1
 VERSION     : $2
-CONFIG  : $3
+CONFIG      : $3 with parameters:
+                log_healthy=<yes|no>
+              and formatted stanzas:
+                cron:<cron_entry>
 PURPOSE     : Checks the content of the 'root' crontab for required entries
+LOG HEALTHY : Supported
 
 EOT
 

sources/lib/platform/hp-ux/check_hpux_sfm_status.sh

@@ -25,6 +25,7 @@
 # @(#) HISTORY:
 # @(#) 2018-10-28: initial version [Patrick Van der Veken]
 # @(#) 2019-01-27: arguments fix [Patrick Van der Veken]
+# @(#) 2019-03-09: text updates [Patrick Van der Veken]
 # -----------------------------------------------------------------------------
 # DO NOT CHANGE THIS FILE UNLESS YOU KNOW WHAT YOU ARE DOING!
 #******************************************************************************
@@ -37,7 +38,7 @@ typeset _CONFIG_FILE="${CONFIG_DIR}/$0.conf"
 typeset _SFMCONFIG_BIN="/opt/sfm/bin/sfmconfig"
 typeset _EVWEB_BIN="/opt/sfm/bin/evweb"
 typeset _CIMPROVIDER_BIN="/opt/wbem/bin/cimprovider"
-typeset _VERSION="2019-01-27"                           # YYYY-MM-DD
+typeset _VERSION="2019-03-09"                           # YYYY-MM-DD
 typeset _SUPPORTED_PLATFORMS="HP-UX"                    # uname -s match
 # ------------------------- CONFIGURATION ends here ---------------------------
 
@@ -395,7 +396,8 @@ function _show_usage
 cat <<- EOT
 NAME        : $1
 VERSION     : $2
-CONFIG  : $3 with:
+CONFIG      : $3 with parameters:
+				log_healthy=<yes|no>
 				check_events=<yes|no>
 				events_age=<age_of_open_events>
 				events_severity=<severities_of_open_events>
@@ -408,6 +410,7 @@ PURPOSE : Checks the heath of SFM (System Fault Management)
 				* checks external event subscriber (optional)
 				* sends & checks a test event (optional)
 				* checks current events (optional)
+LOG HEALTHY : Supported
 NOTE        : Test events should not be generated more than once a day
 
 EOT

sources/lib/platform/hp-ux/check_hpux_sg_cluster_status.sh

@@ -28,6 +28,8 @@
 # @(#) 2018-05-20: added dump_logs() [Patrick Van der Veken]
 # @(#) 2018-10-28: fixed (linter) errors [Patrick Van der Veken]
 # @(#) 2019-01-24: arguments fix [Patrick Van der Veken]
+# @(#) 2019-03-09: changed format of stanzas in configuration file &
+# @(#)             added support for --log-healthy [Patrick Van der Veken]
 # -----------------------------------------------------------------------------
 # DO NOT CHANGE THIS FILE UNLESS YOU KNOW WHAT YOU ARE DOING!
 #******************************************************************************
@@ -37,7 +39,7 @@ function check_hpux_sg_cluster_status
 {
 # ------------------------- CONFIGURATION starts here -------------------------
 typeset _CONFIG_FILE="${CONFIG_DIR}/$0.conf"
-typeset _VERSION="2019-01-24"                           # YYYY-MM-DD
+typeset _VERSION="2019-03-09"                           # YYYY-MM-DD
 typeset _SUPPORTED_PLATFORMS="HP-UX"                    # uname -s match
 typeset _SG_DAEMON="/usr/lbin/cmcld"
 # ------------------------- CONFIGURATION ends here ---------------------------
@@ -49,11 +51,14 @@ typeset _ARGS=$(data_comma2space "$*")
 typeset _ARG=""
 typeset _MSG=""
 typeset _STC=0
+typeset _CFG_HEALTHY=""
+typeset _LOG_HEALTHY=0
 typeset _SG_ENTRY=""
 typeset _SG_MATCH=""
 typeset _SG_CFG_PARAM=""
 typeset _SG_CFG_VALUE=""
 typeset _SG_RUN_VALUE=""
+typeset _IS_OLD_STYLE=0
 
 # handle arguments (originally comma-separated)
 for _ARG in ${_ARGS}
@@ -72,6 +77,38 @@ then
     warn "unable to read configuration file at ${_CONFIG_FILE}"
     return 1
 fi
+_CFG_HEALTHY=$(_CONFIG_FILE="${_CONFIG_FILE}" data_get_lvalue_from_config 'log_healthy')
+case "${_CFG_HEALTHY}" in
+    yes|YES|Yes)
+        _LOG_HEALTHY=1
+        ;;
+    *)
+        # do not override hc_arg
+        (( _LOG_HEALTHY > 0 )) || _LOG_HEALTHY=0
+        ;;
+esac
+
+# check for old-style configuration file (non-prefixed stanzas)
+_IS_OLD_STYLE=$(grep -c -E -e "^sg:" ${_CONFIG_FILE} 2>/dev/null)
+if (( _IS_OLD_STYLE == 0 ))
+then
+    warn "no 'sg:' stanza(s) found in ${_CONFIG_FILE}; possibly an old-style configuration?"
+    return 1
+fi
+
+# log_healthy
+(( ARG_LOG_HEALTHY > 0 )) && _LOG_HEALTHY=1
+if (( _LOG_HEALTHY > 0 ))
+then
+    if (( ARG_LOG > 0 ))
+    then
+        log "logging/showing passed health checks"
+    else
+        log "showing passed health checks (but not logging)"
+    fi
+else
+    log "not logging/showing passed health checks"
+fi
 
 # check & get serviceguard status
 if [[ ! -x ${_SG_DAEMON} ]]
@@ -91,7 +128,8 @@ fi
 
 # do cluster status checks
 # (replace ':' by '|' for cmcviewcl output)
-grep -v -E -e '^$' -e '^#' ${_CONFIG_FILE} 2>/dev/null | tr '|' ':' | while read _SG_ENTRY
+grep -E -e "^sg:" ${_CONFIG_FILE} 2>/dev/null | tr '|' ':' 2>/dev/null |\
+    while read -r _ _SG_ENTRY
 do
     # field split
     _SG_CFG_PARAM="$(print ${_SG_ENTRY} | cut -f1 -d'=')"   # field 1
@@ -111,7 +149,10 @@ do
             _MSG="cluster parameter ${_SG_CFG_PARAM} has a wrong value [${_SG_RUN_VALUE}]"
             _STC=1
         fi
+        if (( _LOG_HEALTHY > 0 || _STC > 0 ))
+        then
             log_hc "$0" ${_STC} "${_MSG}" "${_SG_RUN_VALUE}" "${_SG_CFG_VALUE}"
+        fi
     else
         warn "could not determine status for ${_SG_CFG_PARAM} from command output {cmviewcl}"
     fi
@@ -126,8 +167,12 @@ function _show_usage
 cat <<- EOT
 NAME        : $1
 VERSION     : $2
-CONFIG  : $3
+CONFIG      : $3 with parameters:
+                log_healthy=<yes|no>
+              and formatted stanzas:
+                sg:<param>=<value>
 PURPOSE       : Checks the status of Serviceguard cluster parameters (SG 11.16+)
+LOG HEALTHY : Supported
 
 EOT
 

sources/lib/platform/hp-ux/check_hpux_sg_package_status.sh

@@ -28,6 +28,8 @@
 # @(#) 2018-05-20: added dump_logs() [Patrick Van der Veken]
 # @(#) 2018-10-28: fixed (linter) errors [Patrick Van der Veken]
 # @(#) 2019-01-24: arguments fix [Patrick Van der Veken]
+# @(#) 2019-03-09: changed format of stanzas in configuration file &
+# @(#)             added support for --log-healthy [Patrick Van der Veken]
 # -----------------------------------------------------------------------------
 # DO NOT CHANGE THIS FILE UNLESS YOU KNOW WHAT YOU ARE DOING!
 #******************************************************************************
@@ -37,7 +39,7 @@ function check_hpux_sg_package_status
 {
 # ------------------------- CONFIGURATION starts here -------------------------
 typeset _CONFIG_FILE="${CONFIG_DIR}/$0.conf"
-typeset _VERSION="2019-01-24"                           # YYYY-MM-DD
+typeset _VERSION="2019-03-09"                           # YYYY-MM-DD
 typeset _SUPPORTED_PLATFORMS="HP-UX"                    # uname -s match
 typeset _SG_DAEMON="/usr/lbin/cmcld"
 # ------------------------- CONFIGURATION ends here ---------------------------
@@ -49,12 +51,15 @@ typeset _ARGS=$(data_comma2space "$*")
 typeset _ARG=""
 typeset _MSG=""
 typeset _STC=0
+typeset _CFG_HEALTHY=""
+typeset _LOG_HEALTHY=0
 typeset _SG_ENTRY=""
 typeset _SG_MATCH=""
 typeset _SG_PACKAGE=""
 typeset _SG_CFG_PARAM=""
 typeset _SG_CFG_VALUE=""
 typeset _SG_RUN_VALUE=""
+typeset _IS_OLD_STYLE=0
 
 # handle arguments (originally comma-separated)
 for _ARG in ${_ARGS}
@@ -73,6 +78,38 @@ then
     warn "unable to read configuration file at ${_CONFIG_FILE}"
     return 1
 fi
+_CFG_HEALTHY=$(_CONFIG_FILE="${_CONFIG_FILE}" data_get_lvalue_from_config 'log_healthy')
+case "${_CFG_HEALTHY}" in
+    yes|YES|Yes)
+        _LOG_HEALTHY=1
+        ;;
+    *)
+        # do not override hc_arg
+        (( _LOG_HEALTHY > 0 )) || _LOG_HEALTHY=0
+        ;;
+esac
+
+# check for old-style configuration file (non-prefixed stanzas)
+_IS_OLD_STYLE=$(grep -c -E -e "^sg:" ${_CONFIG_FILE} 2>/dev/null)
+if (( _IS_OLD_STYLE == 0 ))
+then
+    warn "no 'sg:' stanza(s) found in ${_CONFIG_FILE}; possibly an old-style configuration?"
+    return 1
+fi
+
+# log_healthy
+(( ARG_LOG_HEALTHY > 0 )) && _LOG_HEALTHY=1
+if (( _LOG_HEALTHY > 0 ))
+then
+    if (( ARG_LOG > 0 ))
+    then
+        log "logging/showing passed health checks"
+    else
+        log "showing passed health checks (but not logging)"
+    fi
+else
+    log "not logging/showing passed health checks"
+fi
 
 # check & get serviceguard status
 if [[ ! -x ${_SG_DAEMON} ]]
@@ -92,7 +129,8 @@ fi
 
 # do package status checks
 # (replace ':' by '|' for cmcviewcl output)
-grep -v -E -e '^$' -e '^#' ${_CONFIG_FILE} 2>/dev/null | tr '|' ':' | while read _SG_ENTRY
+grep -E -e "^sg:" ${_CONFIG_FILE} 2>/dev/null | tr '|' ':' 2>/dev/null |\
+    while read -r _ _SG_ENTRY
 do
     # field split
     _SG_PACKAGE="$(print ${_SG_ENTRY} | cut -f1 -d':')"
@@ -113,7 +151,10 @@ do
             _MSG="package ${_SG_PACKAGE} parameter ${_SG_CFG_PARAM} has a wrong value [${_SG_RUN_VALUE}]"
             _STC=1
         fi
+        if (( _LOG_HEALTHY > 0 || _STC > 0 ))
+        then
             log_hc "$0" ${_STC} "${_MSG}" "${_SG_RUN_VALUE}" "${_SG_CFG_VALUE}"
+        fi
     else
         warn "could not determine status for ${_SG_PACKAGE}/${_SG_CFG_PARAM} from command output {cmviewcl}"
     fi
@@ -128,8 +169,12 @@ function _show_usage
 cat <<- EOT
 NAME        : $1
 VERSION     : $2
-CONFIG  : $3
+CONFIG      : $3 with parameters:
+                log_healthy=<yes|no>
+              and formatted stanzas:
+                sg:<package_name>:<parameter>=<value>
 PURPOSE     : Checks the status of Serviceguard package parameters (SG 11.16+)
+LOG HEALTHY : Supported
 
 EOT
 

sources/lib/platform/hp-ux/check_hpux_sg_qs_status.sh

@@ -19,12 +19,13 @@
 # @(#) MAIN: check_hpux_sg_qs_status
 # DOES: see _show_usage()
 # EXPECTS: n/a
-# REQUIRES: data_comma2space(), init_hc(), log_hc()
+# REQUIRES: data_comma2space(), init_hc(), log_hc(), warn()
 #
 # @(#) HISTORY:
 # @(#) 2017-05-01: initial version [Patrick Van der Veken]
 # @(#) 2018-10-28: fixed (linter) errors [Patrick Van der Veken]
 # @(#) 2019-01-24: arguments fix [Patrick Van der Veken]
+# @(#) 2019-03-09: added support for --log-healthy [Patrick Van der Veken]
 # -----------------------------------------------------------------------------
 # DO NOT CHANGE THIS FILE UNLESS YOU KNOW WHAT YOU ARE DOING!
 #******************************************************************************
@@ -33,7 +34,7 @@
 function check_hpux_sg_qs_status
 {
 # ------------------------- CONFIGURATION starts here -------------------------
-typeset _VERSION="2019-01-24"                           # YYYY-MM-DD
+typeset _VERSION="2019-03-09"                           # YYYY-MM-DD
 typeset _SUPPORTED_PLATFORMS="HP-UX"                    # uname -s match
 typeset _QS_BIN="/usr/lbin/qsc"
 typeset _QS_AUTH_FILE="/etc/cmcluster/qs_authfile"
@@ -46,6 +47,7 @@ typeset _ARGS=$(data_comma2space "$*")
 typeset _ARG=""
 typeset _MSG=""
 typeset _STC=0
+typeset _LOG_HEALTHY=0
 
 # handle arguments (originally comma-separated)
 for _ARG in ${_ARGS}
@@ -57,6 +59,21 @@ do
     esac
 done
 
+# log_healthy
+(( ARG_LOG_HEALTHY > 0 )) && _LOG_HEALTHY=1
+if (( _LOG_HEALTHY > 0 ))
+then
+    if (( ARG_LOG > 0 ))
+    then
+        log "logging/showing passed health checks"
+    else
+        log "showing passed health checks (but not logging)"
+    fi
+else
+    log "not logging/showing passed health checks"
+fi
+
+
 # check QS presence
 if [[ ! -x ${_QS_BIN} ]]
 then
@@ -79,7 +96,10 @@ case ${_STC} in
         _MSG="could not determine status of QS"
         ;;
 esac
+if (( _LOG_HEALTHY > 0 || _STC > 0 ))
+then
     log_hc "$0" ${_STC} "${_MSG}"
+fi
 
 # ---- config state ----
 if [[ -s ${_QS_AUTH_FILE} ]]
@@ -90,7 +110,10 @@ else
     _MSG="QS authorizations file is missing or empty (${_QS_AUTH_FILE})"
     _STC=1
 fi
+if (( _LOG_HEALTHY > 0 || _STC > 0 ))
+then
     log_hc "$0" ${_STC} "${_MSG}"
+fi
 
 return 0
 }
@@ -101,8 +124,8 @@ function _show_usage
 cat <<- EOT
 NAME        : $1
 VERSION     : $2
-CONFIG  : $3
 PURPOSE     : Checks whether the Serviceguard quorum server is running
+LOG HEALTHY : Supported
 
 EOT
 

sources/lib/platform/hp-ux/check_hpux_sshd_status.sh

@@ -25,6 +25,8 @@
 # @(#) 2017-04-01: initial version [Patrick Van der Veken]
 # @(#) 2018-10-28: fixed (linter) errors [Patrick Van der Veken]
 # @(#) 2019-01-24: arguments fix [Patrick Van der Veken]
+# @(#) 2019-03-09: added support for --log-healthy [Patrick Van der Veken]
+
 # -----------------------------------------------------------------------------
 # DO NOT CHANGE THIS FILE UNLESS YOU KNOW WHAT YOU ARE DOING!
 #******************************************************************************
@@ -34,7 +36,7 @@ function check_hpux_sshd_status
 {
 # ------------------------- CONFIGURATION starts here -------------------------
 typeset _SSHD_PID_FILE="/var/run/sshd/sshd.pid"
-typeset _VERSION="2019-01-24"                           # YYYY-MM-DD
+typeset _VERSION="2019-03-09"                           # YYYY-MM-DD
 typeset _SUPPORTED_PLATFORMS="HP-UX"                    # uname -s match
 # ------------------------- CONFIGURATION ends here ---------------------------
 
@@ -46,6 +48,7 @@ typeset _ARG=""
 typeset _SSHD_PID=""
 typeset _MSG=""
 typeset _STC=0
+typeset _LOG_HEALTHY=0
 typeset _RC=0
 
 # handle arguments (originally comma-separated)
@@ -58,6 +61,20 @@ do
     esac
 done
 
+# log_healthy
+(( ARG_LOG_HEALTHY > 0 )) && _LOG_HEALTHY=1
+if (( _LOG_HEALTHY > 0 ))
+then
+    if (( ARG_LOG > 0 ))
+    then
+        log "logging/showing passed health checks"
+    else
+        log "showing passed health checks (but not logging)"
+    fi
+else
+    log "not logging/showing passed health checks"
+fi
+
 # ---- process state ----
 # 1) try using the PID way
 if [[ -r "${_SSHD_PID_FILE}" ]]
@@ -94,8 +111,11 @@ case ${_STC} in
         ;;
 esac
 
-# handle results
+# report results
+if (( _LOG_HEALTHY > 0 || _STC > 0 ))
+then
     log_hc "$0" ${_STC} "${_MSG}"
+fi
 
 return 0
 }
@@ -105,9 +125,10 @@ function _show_usage
 {
 cat <<- EOT
 NAME        : $1
+NAME        : $1
 VERSION     : $2
-CONFIG  : $3
 PURPOSE     : Checks whether sshd (Secure Shell daemon) is running
+LOG HEALTHY : Supported
 
 EOT
 

sources/lib/platform/hp-ux/check_hpux_syslog.sh

@@ -19,7 +19,7 @@
 # @(#) MAIN: check_hpux_syslog
 # DOES: see _show_usage()
 # EXPECTS: see _show_usage()
-# REQUIRES: data_comma2space(), init_hc(), log_hc()
+# REQUIRES: data_comma2space(), init_hc(), log_hc(), warn()
 #
 # @(#) HISTORY:
 # @(#) 2016-06-20: initial version [Patrick Van der Veken]
@@ -27,6 +27,7 @@
 # @(#) 2018-10-28: fixed (linter) errors [Patrick Van der Veken]
 # @(#) 2018-11-18: do not trap on signal 0 [Patrick Van der Veken]
 # @(#) 2019-01-24: arguments fix [Patrick Van der Veken]
+# @(#) 2019-03-09: added support for --log-healthy [Patrick Van der Veken]
 # -----------------------------------------------------------------------------
 # DO NOT CHANGE THIS FILE UNLESS YOU KNOW WHAT YOU ARE DOING!
 #******************************************************************************
@@ -37,7 +38,7 @@ function check_hpux_syslog
 # ------------------------- CONFIGURATION starts here -------------------------
 typeset _CONFIG_FILE="${CONFIG_DIR}/$0.conf"
 typeset _STATE_FILE="${STATE_PERM_DIR}/discovered.syslog"
-typeset _VERSION="2019-01-24"                           # YYYY-MM-DD
+typeset _VERSION="2019-03-09"                           # YYYY-MM-DD
 typeset _SUPPORTED_PLATFORMS="HP-UX"                    # uname -s match
 # ------------------------- CONFIGURATION ends here ---------------------------
 
@@ -49,6 +50,8 @@ typeset _ARG=""
 typeset _MSG=""
 typeset _STC=0
 typeset _STC_COUNT=0
+typeset _CFG_HEALTHY=""
+typeset _LOG_HEALTHY=0
 typeset _TMP_FILE="${TMP_DIR}/.$0.tmp.$$"
 typeset _CLASSES_LINE=""
 typeset _SYSLOG_FILE=""
@@ -93,6 +96,30 @@ else
     # add PID qualifier to last item
     _SYSLOG_CLASSES="${_SYSLOG_CLASSES}(\[[0-9]+\])?:"
 fi
+_CFG_HEALTHY=$(_CONFIG_FILE="${_CONFIG_FILE}" data_get_lvalue_from_config 'log_healthy')
+case "${_CFG_HEALTHY}" in
+    yes|YES|Yes)
+        _LOG_HEALTHY=1
+        ;;
+    *)
+        # do not override hc_arg
+        (( _LOG_HEALTHY > 0 )) || _LOG_HEALTHY=0
+        ;;
+esac
+
+# log_healthy
+(( ARG_LOG_HEALTHY > 0 )) && _LOG_HEALTHY=1
+if (( _LOG_HEALTHY > 0 ))
+then
+    if (( ARG_LOG > 0 ))
+    then
+        log "logging/showing passed health checks"
+    else
+        log "showing passed health checks (but not logging)"
+    fi
+else
+    log "not logging/showing passed health checks"
+fi
 
 # check SYSLOG file
 [[ -r ${_SYSLOG_FILE} ]] || _MSG="SYSLOG file ${_SYSLOG_FILE} cannot be found"
@@ -144,8 +171,11 @@ else
     _MSG="no new SYSLOG messages found"
 fi
 
-# handle results
+# report results
+if (( _LOG_HEALTHY > 0 || _STC > 0 ))
+then
     log_hc "$0" ${_STC} "${_MSG}"
+fi
 
 # do cleanup
 [[ -f ${_TMP_FILE} ]] && rm -f ${_TMP_FILE} >/dev/null 2>&1
@@ -159,13 +189,15 @@ function _show_usage
 cat <<- EOT
 NAME        : $1
 VERSION     : $2
-CONFIG  : $3 with:
+CONFIG      : $3 with parameters:
+                log_healthy=<yes|no>
                 syslog_file=<path_to_syslog_file>
                 syslog_classes=<list_of_facility_classes_to_search_for>
 PURPOSE     : Provides a KISS syslog monitor (keep tracks of already discovered messages in
               a state file and compares new lines in SYSLOG to the ones kept in the
               state file. The plugin will sort both state & SYSLOG data before doing
               the comparison.
+LOG HEALTHY : Supported
 
 EOT
 

sources/lib/platform/hp-ux/check_hpux_syslogd_status.sh

@@ -24,6 +24,7 @@
 # @(#) HISTORY:
 # @(#) 2018-02-08: initial version [Patrick Van der Veken]
 # @(#) 2018-02-13: fix to avoid log check if syslogd is not active [Patrick Van der Veken]
+# @(#) 2019-03-09: text updates [Patrick Van der Veken]
 # -----------------------------------------------------------------------------
 # DO NOT CHANGE THIS FILE UNLESS YOU KNOW WHAT YOU ARE DOING!
 #******************************************************************************
@@ -34,7 +35,7 @@ function check_hpux_syslogd_status
 # ------------------------- CONFIGURATION starts here -------------------------
 typeset _SYSLOGD_PID_FILE="/var/run/syslog.pid"
 typeset _SYSLOGD_LOG_FILE="/var/adm/syslog.log"
-typeset _VERSION="2019-02-13"                           # YYYY-MM-DD
+typeset _VERSION="2019-03-09"                           # YYYY-MM-DD
 typeset _SUPPORTED_PLATFORMS="HP-UX"                    # uname -s match
 # ------------------------- CONFIGURATION ends here ---------------------------
 
@@ -159,7 +160,6 @@ function _show_usage
 cat <<- EOT
 NAME        : $1
 VERSION     : $2
-CONFIG      : $3
 PURPOSE     : Checks whether syslogd service is running and whether syslogd
               is actually logging to ${_SYSLOGD_LOG_FILE}.
 LOG HEALTHY : Supported

sources/lib/platform/hp-ux/check_hpux_vg_minor_number.sh

@@ -24,6 +24,7 @@
 # @(#) HISTORY:
 # @(#) 2016-04-28: initial version [Patrick Van der Veken]
 # @(#) 2019-01-24: arguments fix [Patrick Van der Veken]
+# @(#) 2019-03-09: added support for --log-healthy [Patrick Van der Veken]
 # -----------------------------------------------------------------------------
 # DO NOT CHANGE THIS FILE UNLESS YOU KNOW WHAT YOU ARE DOING!
 #******************************************************************************
@@ -32,7 +33,7 @@
 function check_hpux_vg_minor_number
 {
 # ------------------------- CONFIGURATION starts here -------------------------
-typeset _VERSION="2019-01-24"                           # YYYY-MM-DD
+typeset _VERSION="2019-03-09"                           # YYYY-MM-DD
 typeset _SUPPORTED_PLATFORMS="HP-UX"                    # uname -s match
 # ------------------------- CONFIGURATION ends here ---------------------------
 
@@ -43,6 +44,7 @@ typeset _ARGS=$(data_comma2space "$*")
 typeset _ARG=""
 typeset _MSG=""
 typeset _STC=0
+typeset _LOG_HEALTHY=0
 typeset _VG=""
 typeset _VG_DUPE=""
 typeset _VG_DUPES=""
@@ -57,8 +59,23 @@ do
     esac
 done
 
+# log_healthy
+(( ARG_LOG_HEALTHY > 0 )) && _LOG_HEALTHY=1
+if (( _LOG_HEALTHY > 0 ))
+then
+    if (( ARG_LOG > 0 ))
+    then
+        log "logging/showing passed health checks"
+    else
+        log "showing passed health checks (but not logging)"
+    fi
+else
+    log "not logging/showing passed health checks"
+fi
+
 # get list of major and minor numbers for vgs
-vgdisplay -F | cut -f1 -d':' | cut -f2 -d'=' | while read _VG
+vgdisplay -F 2>>${HC_STDERR_LOG} | cut -f1 -d':' 2>/dev/null | cut -f2 -d'=' 2>/dev/null |\
+    while read -r _VG
 do
     ls -l ${_VG}/group >>${HC_STDOUT_LOG} 2>>${HC_STDERR_LOG}
 done
@@ -67,20 +84,26 @@ done
 _VG_DUPES="$(awk '{ print $5":"$6 }' ${HC_STDOUT_LOG} | sort | uniq -d)"
 if [[ -n ${_VG_DUPES} ]]
 then
-    print "${_VG_DUPES}" | while read _VG_DUPE
+    print "${_VG_DUPES}" | while read -r _VG_DUPE
     do
         _MSG="MAJ/MIN numbers combination '${_VG_DUPE}' is not unique"
         _STC=1
 
-        # handle unit result
+        # report result
+        if (( _LOG_HEALTHY > 0 || _STC > 0 ))
+        then
             log_hc "$0" ${_STC} "${_MSG}"
+        fi
     done
 else
     _MSG="no VGs with duplicate MAJ/MIN numbers detected"
 
-    # handle unit result
+    # report result
+    if (( _LOG_HEALTHY > 0 || _STC > 0 ))
+    then
         log_hc "$0" ${_STC} "${_MSG}"
     fi
+fi
 
 return 0
 }
@@ -91,8 +114,9 @@ function _show_usage
 cat <<- EOT
 NAME        : $1
 VERSION     : $2
-CONFIG  : $3
 PURPOSE     : Checks whether all volume groups have a unique minor number
+LOG HEALTHY : Supported
+
 
 EOT
 

sources/lib/platform/linux/check_linux_sshd_status.sh

@@ -142,6 +142,8 @@ case ${_STC} in
         _MSG="could not determine status of sshd"
         ;;
 esac
+
+# report results
 if (( _LOG_HEALTHY > 0 || _STC > 0 ))
 then
     log_hc "$0" ${_STC} "${_MSG}"